50mm Galvanized Steel Cup Head Weld Pins To Secure Insulation Inside Fabricated

Galvanized Steel Cup Head Weld Pins Produce Introuduce:

Cup head wepins is a weld type of insulation fastener, it simplify the permanent installtion of duct

liner or other insulation materials to the sheet metal of duct work or other HVAC sheet metal Housings.

Cup head weld pin is mainly used for fasten the insulation to the sheet metal of insulation construction.

It works with welding equipment, through welding for fasten the insulation.

MATERIAL: common material is Low Carbon Steel, other materials are available.

FINISH: Zinc Plating is standard, Copper plating also is available.

ANNEALING: all steel pins are fully annealed unless otherwise specified.

WASHER: Low carbon steel & zinc plating.

BEVEL: washer edge is beveled to prevent cutting of insulation material

Specification of Galvanized Steel Cup Head Weld Pins :

Pic of Galvanized Steel Cup Head Weld Pins :

Recommended assembly method:

1.Work surfaces should be clean and dry, free of dust, grease, oil and any other loose matter.
2.Remove the protective release paper taking care not to touch the adhesive.
3.Place the hanger in the required position and press the base against the surface to be insulated
4.Insulation can be impaled immediately and firmly locked with fastening clips but maximum strength of
adherence is achieved after 24 hours

Package of alvanized Steel Cup Head Weld Pins :

HUIHAO COMPANY :