2.7 X 70 Mm Capped Insulation Weld Pins With Bevel Edge Washer
|
2.7 X 70 Mm Capped Insulation Weld Pins With Bevel Edge Washer
>>> Introduction of the Capped Weld Pins
Capped Weld Pins also named Cup Head weld pins is welded through the insulation, allowing the fabrication to be done in one easy step. The head of the pin is attached to the nail, so there is no need to add a washer.Reduced labor time - Neat, finished appearance Capped Capacitor Discharge (CD) Weld Pins are used to fasten insulation to the inside of sheet metal air ducts. These fasteners are usually applied when the ductwork is being fabricated. The fasteners have been specifically designed to work with all currently available duct liners and Capacitor Discharge (CD) type welding application equipment. Capped CD Weld Pins are available for 12mm,25mm,38mm,50mm,75mm and 100mm insulation or other customized thickness.
>>>Specification Of the Capped Weld Pins
>>> Packing of the Capped Weld PinsCarton or Plastic casks then packed with pallets.
>>>Application Of The Capped Capacitor Discharge (CD) Weld Pins:
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Product Tags: 2.7 X 70 Mm insulation weld pins Capped insulation weld pins Bevel Edge Washer insulation weld pins | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
12 Ga X 38 Mm Insulation Cupped Head Weld Pins For HVAC Insulation |
|
Galvanized Steel Self Sealing Pins With Cup Head Base For HVAC Insulation |
|
Cup Head CD Weld Pins With Insulated Base For Duct Liner Insulation |
|
Cup Head Insulation Welded Pins With 30 Mm Round Base For HVAC Duct Insulation |
|
12Ga X 70 Mm Galvanized Steel Cup Head Welded Pins For HVAC Duct Insulation |
|
2" Capacitor Discharge Cup Head Weld Pin With Insulated Paper Washer For Thermal And Acoustical Insulation |