3 X 90 Mm Pointed Head Marine CD Weld Pins With Speed Clips

CD Weld Pins is a type insulation pins that are applied with welding or equipment. Made of diffferent material from the application .

Such as Mild steel, Stainless steel , Aluminum material .Popularly used as an insulation fastener in combination with self locking washers, dome cap washers .

• Name : Capacitor Discharge (CD) weld pins ,Insulation Pin /stud pin / welding pin/ stud welding accessories / weld pins / stud welder pins
• Material : Copper coated/Zinc plated for the mild steel . Stainless Steel, Aluminum mateiral , etc 
• Pin diameter: 3.0mm in common ,2mm, 2.7mm,3mm ,4mm ,5mm, etc 
• Pin length:20 mm-350mm , length could be made according to your requirements.
• Fixing parts: Speed clips/Washers .
• Application : Marine building system , Power plant , other equipments.

Photos of the CD Weld Pins

Application of the CD Weld Pins

Being in use of Car manufacturing , Train Stations , Industrial building , Household Adornment , high stress environment

such as off road construction , large expansion bridges , skyscrapers , power plant , military defense vehicles , and

equipment in high temperature environment .

How to install the CD Weld Pins

1: weld pins in place
2: install insulation on pins
3: press washers on pins
4: bend over the pin or clip off the pins

Advantages of the CD Weld Pins

1.Standard pin point , easy for welding

2.Pins are soft , easy for bending over

3. self locking washers are safety for installing

FAQ Of The Capacitor Discharge Stud Welding Pins

1) Length of this style pin should exceed the thickness of the insulation, in order to securely

attach the self-locking washer.

2) Nail point is standard - available with "blunt end" as special order.

3) Capacitor Discharge weld pins simplify the permanent attachment of insulation to just about

any kind of construction metal surface.

4) They can be applied quickly and easily using standard CD or Arc stud welding equipment.
5) Weld pins are available in different styles to cover a wide variety of applications.

6) Some factors to consider regarding the pin style needed for your job would be the base

metal type size and surface condition, and also the welding equipment to be used.

Stud Welding Systems

The standard, portable CD system consists of:

1) The Controller or (Power Unit) which is plugged into the one-hundred-and-ten-volt outlet.

2) The CD Gun with cables is used to command the power unit and deliver weld current,

with the Gun also serving as the Pin holder to properly place the pin during welding.

3) Then, on the other side of “the circuit” a ground cable and clamping connection is attached

to the work-surface to complete our Capacitor Discharge connections.

4) And finally, special accessories are used to hold the Pin in the Gun.

Email: david@huihaomesh.com

WhatsApp: +86-18732199987