Galvanized steel Self Adhesive Insulation Hanger Pins for rockwool board

Details of Self Adhesive Insulation Hanger Pins  :

• Self addhesive insulation hanger pins is a kind of insulation pins
• There is a double face adhesive tape on the base, so they are called self stick insulation pins
• the base is 50×50mm,
• the base made from stainless steel or Galvanized steel.
• The pin diameter is 2.7mm, length are available from 32mm from 203mm,
• the pin is made from galvanized steel, Aluminum or stainless steel
• Install part :square self locking washer ,round self locking washer, dome cap washe                                                                                      

Self Adhesive Insulation Hanger Pins spefication  :

Self Adhesive Insulation Hanger Pins Pic :

How to use stick pins to secure insulation :

• Simply peel off the backing tape.
• Stick the pins to the surface where the insulation will be placed.
• Remove the fixing disc.
• Put the insulation in place, and push the insulation onto the pin.
• Push the fixing disc over the pin.
• IMPORTANT NOTE – ADD THE CAP OR BEND THE PIN OVER ON ITSELF TO AVOID                                                IT IMPALING SOMEONE.
• Your insulation is now hanging without the fear of falling out.
• Super sticky, good luck getting them off if you stick them in the wrong place!

Rock Wool Self Stick Insulation Pins Buying guide :

1. choose annealing wire for the pin
soft wire is easy to bend when fixing rock wool material with self locking washer
2.common size is 2.7mm ,3.0mm wire to make the pin
2.7mm and 3.0mm wre diamerer is standard size for insulation pin ,at the same time ,the diameter is based
on the pin length
3. the base is square hardness metal sheet
hardness metal sheet is more firmly,no-shedding ,non-deformable
4.What’s the right length of insulation pins?
You should choose the length taking several factors into consideration. The first item to consider is the
insulation thickness. Your insulation stick pins need to be longer than insulation material to retain them
properly. How much longer? Usually 10-20mm longer should be sufficient.

Package Of Galvanized steel Self-adhesive Stick Pins :