Mineral Wool Fiberglass Board Peel Press Self Stick Insulation Anchor

Noted for Self Stick Insulation Support Nail

1. For the pin diameter, we choosed galvanbized anneaded steel wire and aluminum wire for making pins.

2. stainless steel softly wire for custom orders

3. For the pin length, the length can be meet 300mm.

4. Base size, pin diameter and pin length are customized according to customer requirements.

5. Zinc coated surface treatment for mild steel material

6. Special material can be customized.

installation guides of Self Stick Insulation Support Nail

1. Best results are obtained when ambient temperature is above 40° F at the time of application.
2. Remove the release paper from the base plate and apply hanger to a suitable flat surface.
3. A firm straight, forward pressure should be used. Do not twist.
4. Due to the quick-tack nature of the adhesive, it is very important that the release paper not be removed until ready to apply the hanger.
5. Insulation may be applied immediately after properly securing the hanger.
6. self stick insulation support nail should be stored at 75° F and 50% relative humidity. It is important that stock be rotated. Shelf life is estimated at 2 years if stored as recommended

performance tape of self stick tape

1. Polyethylene foam with aggresive pressure sensitive rubber resin adhesive.
2. Service Temperature : -40 deg C to +70 Deg C
3. Highly Resistant to abrasion, corrosion and moisture.
4. Confirms to European Directive 2000/53 (Lead, Chromium VI, Mercury, Cadmium free)
5. 10 Minutes 180 degree Peel Adhesion : 30 N/25mm
6. 500 Hour static shear ( Stainless Steel) : 0.8 kg/cm3

Specification details of Self Stick Insulation Support Nail

Why choose our HUIHAO insulation fasteners?
1.We choose the best quality materials for making insulation fasteners
2.We do copper plating, zinc coated and phosphating pretreatment for the raw material using drawing machine.
3.We purchase the multi-station cold forging machine to ensure the better mechanical property of shear connector to match the standard(BS EN ISO13918:2008, AWS D1.1, etc.), or as per customer's special requirement.
4.We use the automatic riveting machine to install .
5.After rust prevention, HUIHAO insulation fasteners can suitable for long time ship on the sea.
6.Short delivery time because of our reasonable production flow management