Mild Steel Insulation Support Hanger With 50mm Adhesive Tape
Features of insulation support hanger:- anneaded finished for steel wire and stainless steel wire to make
the softly hanger pins.
- hardness metal sheet is used for base of the perforated insulation
hangers
- suitable material make sure the locked is firmly.
- Environmentally-friendly, our product meet American standard,
Japanese standard, European standard and German standard.
- Light, dust free, fire retardant (A) and easy to install
- Heat reflection, heat insulation, sound insulation, counter
radiation, counter vibration.
- During Summer: moisture barrier, sun protection, waterproof, energy
saving consumed by cool air conditioning
- During Winter: heat protection, remarkable energy saving consumed
by warm air conditioning
- Best results are obtained when ambient temperature is above 40° F
at the time of application
- A firm straight, forward pressure should be used. Do not twist
Technical data Of insulation support hanger
| modle | BASE TYPE | SUPPORT NAIL DIA | LENGTH OF NAILS | | SQ-50-55 | 0.5MM X50MM | 2.7MM, 3MM | 55MM | | SQ-50-63 | 0.5MM X50MM | 2.7MM, 3MM | 63MM | | SQ-50-70 | 0.5MM X50MM | 2.7MM, 3MM | 70MM | | SQ-50-90 | 0.5MM X50MM | 2.7MM, 3MM | 90MM | | SQ-50-100 | 0.5MM X50MM | 2.7MM, 3MM | 100MM | | SQ-50-110 | 0.5MM X50MM | 2.7MM, 3MM | 110MM | | SQ-50-120 | 0.5MM X50MM | 2.7MM, 3MM | 120MM | | SQ-50-130 | 0.5MM X50MM | 2.7MM, 3MM | 130MM | | SQ-50-140 | 0.5MM X50MM | 2.7MM, 3MM | 140MM | | SQ-50-160 | 0.5MM X50MM | 2.7MM, 3MM | 160MM | | SQ-50-180 | 0.5MM X50MM | 2.7MM, 3MM | 180MM | | SQ-50-203 | 0.5MM X50MM | 2.7MM, 3MM | 203MM | | SQ-50-230 | 0.5MM X50MM | 2.7MM, 3MM | 230MM | | SQ-50-250 | 0.5MM X50MM | 2.7MM, 3MM | 250MM |
Material of insulation support hanger:- Galvanised mild steel (PIN ADHESIVE MS)
- Stainless steel (PIN ADHESIVE.SS)
- Aluminium (PIN ADHESIVE.AL)
| Adhesive | Base | White, cross-linked, closed-cell polyethylene foam | | Coating | Modified acrylate adhesive on both sides | | Liner | Siliconized paper | | Thickness | 1 mm | | Power (FINAT-TM 1, on stainless steel, one side covered with 50
microns polyester film) |
| 1 minute | >18 N/25 mm | | 20 minutes | tear | | 24 hours | tear | | Shear strength (FINAT-TM 8, on stainless steel, one side covered
with 50 micronspolyester film) |
| 23 °C | >150 hours | | 70 °C | 1 hour |
Applications of Insulation support Hangersquare base insulation support hanger that is both fast and
easy to install.
Suitable for fixing all types of insulation to concrete, brick,
stone or block base material.Insulation fastening solutions for
concrete and masonry, suitable for insulation materials such as
mineral wool, EPS, XPS and fibreglass.
|
