35mm Insulation Metal Fixing Washer Discs Galvanized Steel For Tile Backer Boards

Description Of The 35mm Insulation Fixing Washer Discs

The 35mm Insulation Fixing Washer Discs are used for tile backer boards.

These fixing discs have been specially designed to provide an easy secure way to fix

marmox and wedi-type insulation boards on the floor and walls.

Tile Backer Board Washers have a counter-sunk midsection, because the Marmox-style

board can pull the screw into the insulation, but not the outer rim of the washer.

Consequently, the remaining protrusion sits flush with the board’s surface.

Hence making it ready for an unhindered application of the subsequent additional floor layers.

Created with a perforated surface which will maintain a maximum board surface exposure.

To protect the insulation fixing washer discs from corrosion, they are galvanised. And this

minimises almost any chance of degradation over time.

Other Types Of Insulation Fixing Washer Discs For Tile Backer Boards

Application Of The Insulation Metal Fixing Washer Discs For Tile Backer Boards

We would highly recommend using 15 washer discs per 1200 x 600mm board. This is however

only a rough guide to the number of washers needed to be used with the tile backer boards.

Depending upon the material, thickness, subsurface, and the final floor covering to be

put onto the boards. Tile backer board washers can be used on either wall or on floors.

It is the responsibility of the installer to use the correct number of discs that hold the board

firmly in place.