Bevel Edge Cup Head Insulation Weld Pins With Retaining Washer

Details of Bevel Edge Cup Head Insulation Weld Pins 

This type of Capacitor Discharge (CD) pin is welded through the insulation, allowing the fabrication

to be done in one easy step. The head of the pin is attached to the nail, so there is no need to add

a washer.Reduced labor time - Neat, finished appearance
Available as Mini-Cup (MC) or Full-Size Cupped Head (CH) Style, with a beveled head.Flat head

available as a special order.
Pins are also available "insulated" for welding through foil-faced materials to prevent arcing on the

foil facia.Longer lengths available as special order.Length of pin to be used is determined by the

thickness, density & composition of the insulation being installed.
Material:Galvanized steel,Stainless steel available on special order

Pic of Bevel Edge Cup Head Insulation Weld Pins

Specifiaction of Bevel Edge Cup Head Insulation Weld Pins

Feature of Bevel Edge Cup Head Insulation Weld Pins

Recommended assembly method:

1.Work surfaces should be clean and dry, free of dust, grease, oil and any other loose matter.
2.Remove the protective release paper taking care not to touch the adhesive.
3.Place the hanger in the required position and press the base against the surface to be insulated
4.Insulation can be impaled immediately and firmly locked with fastening clips but maximum strength of

adherence is achieved after 24 hours

Package of Insulation Mini Cupped Head Weld Pins:

Package : usually the package is 800/1000/1500 /2000/3000/5000 pcs in carton on pallet

800/1000/15000/2000 in a drum on the pallet

Delivery :for big you choose by sea

for small order or agercy order ,you can choose express by DHL,Fedex ,UPS ,ect

we can also supply door to door service by sea ,by air