Galvanized Steel Conical Tip Stud Welding Pins Capacitor Discharge Spot Welding Nails
|
Galvanized Steel Conical Tip Capacitor Discharge (CD) Weld PinsIntroduction To The Conical Tip Capacitor Discharge (CD) Weld PinsCapacitor Discharge (CD) Weld Pins are commonly used to attach blanket insulation to ducts, ovens, boilers and hot or cold equipment. The pins are welded in place, the insulation impaled over the pin and then self locking washers are installed over the pin to secure the insulation.
1. Mild Steel Conical Tip CD Weld Pins With Zinc Or Copper Plated
Materal: Mild Steel Finish: Zinc coated or copper plated Washers: Self-locking washers are available in a variety of sizes, shapes, and materials. Pin Dia: 12GA Or 10GA Flange Size: 0.165" Or 0.188" Flange Height: 4mm Length: 1/2"-10"
2. Specification Of The Aluminum Alloy 1100-H14 Conical Tip Capacitor Discharge(CD) Weld Pins
Materal: Aluminum Alloy 1100-H14 Washers: Self-locking washers are available in a variety of sizes, shapes, and materials. Pin Dia: 12GA Or 10GA Flange Size: 0.220" Or 0.250"
Stud Welding System
the standard, portable CD system consists of:
> The Controller or (Power Unit) which is plugged into the one-hundred-and-ten-volt outlet. > The CD Gun with Cables is used to command the power unit and deliver weld current, with the Gun also serving as the Pin holder to properly place the pin during welding. > Then, on the other side of “the circuit” a ground cable and clamping connection is attached to the work-surface to complete our Capacitor Discharge connections. > And finally, special Accessories are used to hold the Pin in the Gun.
|
||||||||||||||||||||||||||||||||
| Product Tags: galvanized steel stud welding pins capacitor discharge spot stud welding pins conical tip stud welding insulation pins |
|
Galvanized Steel Duct Liner Pins 4 Inch For Air Duct Fiberglass Insulation |
|
Length Customizable Bi Metallic Stud Welding Pins Used With Capacitor Discharge Spot Welder For Ship Bulkhead Insulation Work |
|
Stainless Steel 316L Capacitors Discharge CD Insulation Pins 3x230mm Used For Marine Insulation Industry |
|
4" Capacitor Discharge Stud Welding Insulation Pins Installing Fiberglass Insulation Fasteners For HVAC Duct Work |
|
5x160mm Capacitor Discharge (CD) Weld Pins Used For Attaching Insulation To Various Metals |
|
Stainless Steel Partial Thread ARC Welding Studs With A Pitch Diameter Weld Base |