Insulation Fastener Stud Welding Machine

Insulation Fastener Stud Welder , 3mm Diameter Insulation Nail Welding Machines

We can be your country standard to custome the power,we accept small order an supply door to door services

Welding process- Insulation Fastener Stud Welder , 3mm Diameter Insulation Nail Welding Machines

1) the shape of the stud can be various shapes of use value, according to the required length standard straight stud (with screw Lines, with

    no thread), the diameter range between M3 and M4, in addition to the threaded fasteners, you can also use the circle The threaded stud,

    most of the stud with a flange, extension. stud material low carbon steel materials stud demanding a copper plating surface treatment,

    facilitate conductive

2) requirements conform to the requirements of the weld ability of work piece, the surface can't have rust and paint, should be properly cleaned,

   or dirt will clip in Weld, the effect of weld strength.

Welding machine operation procedures and matters needing attention welding preparation

(1) insert the earth wire electrode holder, control line, quick connectors welding machine control panel connection port;
(2) insert the power input line welding power input port, and open the power control switch;
Remark: this equipment is a low frequency, do not and argon arc welding machine and other high frequency equipment sharing power Mouth,

               mouth, and make using the equipment with more distance.
(3) check whether the indicator light is open;
(4) the voltage regulation knob to turn check whether can normal working voltage charging and discharging;
(5) the adjustment of the charging voltage
Before plug-in power charging voltage adjustment knob shall be transferred to the smaller values, and then switched on.Slowly clockwise rotation

Adjust knob, and watch the charging voltage meter, adjust until the required working voltage, after working voltage is set,After each welding welding

machine can automatically recharge to the set value.

Insulation Fastener Stud Welder , 3mm Diameter Insulation Nail Welding Machines-technical parameter

accessories-Insulation Fastener Stud Welder , 3mm Diameter Insulation Nail Welding Machines