M8X120mm Nylon Frame Fixing Anchors , Plastic Fixing Pins with Nail Inside

M8X120mm Nylon Frame Fixing Anchors, Plastic Fixing Pins with Nail Inside

 data sheet of plastic fixing pins / nylon frame fixing anchors

Features of the plastic fixing pins/nylon frame fixing anchors

1. For fastening of all insulation materials.

2.Denser insulation materials

3.Rough cast head provides a key for render

4.With high efficiency, low cost, anti-aging, anti-thermal shock, anti-corrosion, cold and heat

5. High pressure, good tensile properties

6.Undeformed, moisture, slow vibration, noise absorption and sound insulation effection

The arrangement of the external wall nylon fixing anchors.

The number of anchors installed on the outer wall insulation system of the extruded board;

the average of 1-10 layers is 6/m2, the average of 11-20 layers is 7/m2, and the layers of 21-26 are 9/m2. Any single block

with an area greater than 0.1m2 must be anchored, depending on the shape and site conditions;

the density of the anchor should be increased around the angle of the sun, under the mouth, and around the edge of the hole.

The distance is not more than 300mm, from the edge of the base. Not less than 60mm