M8X90mm Plastic Insulation Fixing Pins , Insulation Wall plugs

M8X90mm Plastic insulation Fixing Anchors , PE Material Anchors Wall plugs

Insulation fixing anchors is a special engineering plastic expansion wall plugs that fixes the insulation board to the wall. Insulation fixing anchors

are special anchors for exterior wall insulation, which are widely used in building decoration and anchoring of wall insulation houses. It consists

of galvanized screws, nylon risers and fixed discs. According to the thickness of the insulation layer, it is divided into various specifications.

Material: It is made of the nylon material, durable and well designed for holding items firmly on the wall.The head of the screw is

countersunk head.The screw is steel made and yellow zinc plated.The length of the screw is standard.The plug is made of the gray nylon.

• Structure: Geometry of the expansion pipe, in the solid structure of the object in the expansion.

• Color:Most grey and white, other colors are also available.

• Function: To prevent rotation of the structral design, when using the screw does not rotate in the air to follow.

• Feature:Elasticity, shock resisting, durable, light weight, easy installation, resistance to corrosion

 types of plastic insulation fixing anchor/anchor wall plugs

Conjoined: 8×62, 8×82, 8×102, 8×122, 8×142, 10×162.
Split: 10×162, 10×182, 10×202, 10×252, 10×302, 10×352, 10×402, 10×452, 10×502, 10×552, 10×602

Anchors wall plugs data sheet 

Performance parameter of plastic insulation fixing anchor/anchor wall plug

According to the JG/T366-2012 standard;
Knocking anchor: Tap the expansion joint or expansion sleeve to squeeze the borehole wall to create an expansion anchor.

Claim:
1. The nominal diameter of the disk of the disc anchor should not be less than 60mm and the tolerance is 1.0mm. The nominal

diameter of the expansion sleeve should not be less than 8 mm with a tolerance of ±0.5 mm.
2. Standard value of anchorage capacity of anchor bolt: standard value of tensile load capacity of anchor bolt Fk≥0.60
3. Anchor bolt disc tensile force standard value: disc pullout standard value Frk≥0.50