371 - 380 of 608
m60 dth hammer bits
Selling leads
|
... pin Weight (less bit) 487kg (1071lbs) Hole range 305mm-445mm Working pressure 10-25bar Impact rate at 1.7 Mpa 16Hz Recommended rotation speed 15...
2024-12-09 12:11:40
|
|
... 3 1/2" REG pin Weight (less bit) 100kg Hole range 155mm-203mm Working pressure 10-35bar Impact rate at 1.7 Mpa 23Hz Recommended rotation speed 20...
2024-12-09 12:11:40
|
|
... the inner and outer pipes of a dual wall drill pipe with the cuttings being forced up through the centre of the drill rods. This is the opposite ...
2025-07-20 00:09:47
|
|
...Hammer Product Description: With professional manufacturing experience in DTH hammer production, our factory can supply you with high pressure and ...
2024-12-09 12:57:59
|
|
...Hammer For Mining Product introduction: A down-the-hole drill, usually called DTH by most professionals, is basically a mini jackhammer screwed on ...
2024-12-09 13:09:44
|
|
...DTH drill pipes are made of superior alloy and the both thread ends are friction welded to the seamless steel pipe.The high pressure air is ...
2024-12-09 12:46:19
|
|
...DTH drill pipes are made of superior alloy and the both thread ends are friction welded to the seamless steel pipe.The high pressure air is ...
2024-12-09 12:46:19
|
|
... welded to the seamless steel pipe.The high pressure air is delivered to DTH hammer by DTH drill pipe, simultaneously it transfers the rotation and ...
2024-12-09 13:27:40
|
|
... and long service life of SOLLROC DTH hammer due to high quality alloy steel materials and advanced producing technology. 3. Low problem rate and ...
2024-12-09 12:11:40
|
|
...Hammer CIR 90 CIR110 CIR150 For Water Well Drilling Product APPLICATION: DTH hammers and bits are widely used in underground mining, quarries, ...
2024-12-09 12:33:51
|