Water Well Drilling 4'' DTH Hammer Without Foot Valve With Bit Shank HD45A
|
4'' DTH Hammer without Foot Valve for Water Well Drilling with Bit Shank HD45A
Product description: A down-the-hole hammer provides a solution to the problem of removing hard rock barriers encountered in a bore. The DTH hammer resembles a small jack hammer. It screws onto the end of a drill string like a section of drill pipe. Like the jack hammers used above ground, it's air-powered with a high cyclic rate; unlike jack hammers above ground, it combines its fast-action hammer with a rotary, drilling action. This combined action rotates its chisel-like tip as it drives into the rock, breaking it into chips and dust. Because the DTH hammer is pneumatically powered, it has an air exhaust, which blows the chips and dust from the bore.
Product Advantages: 1. Better borehole quality and accuracy
HD45A hammer
HD45A bit specification
Concave face is suitable for all-round rock formation, especially for medium hard and homogeneous rock formations,excellent control over hole deviation. Convex face is suitable for medium hard rock formation.Non abrasive rock formations. High peneration rate. Flat face is suitable for hard and abrasive rock formation.High peneration rates and resistance to steel wash.
Detailed photos:
Application: |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Product Tags: Water Well Drilling 4in DTH Hammer Bit Shank HD45A DTH Hammer 2. 5Mpa Down The Hole Hammer |
![]() |
10-500kgs Down The Hole Hammer With Special Steel For Well Drilling |
![]() |
100kgs DHD360 Hammer 1.0-3.0Mpa Working Pressure 3 1/2'' API REG Thread |
![]() |
QL Shank Down The Hole Hammer 2''-15'' Size for Water Well Drilling |
![]() |
SD Shank Down The Hole Hammer 1.0-3.0Mpa Working Pressure 10-500kgs Weight |
![]() |
Customized Color Mining Hammer With1.0-3.0Mpa Working Pressure |
![]() |
6 5/8''API Reg Down the Hole Drill Hammer Working Pressure 1.0-3.0Mpa |