8'' QL80A DTH Hammer without Foot Valve Type for Qre Mining or Well
Drilling
Product Advantages:
1.Avoid the problem happens on foot valve. Fracture,expansion and
contraction
2.Lower air comsumption and higher impact frequency. 15-30% higher
drilling efficiency than the bit with foot valve.
3.Simpler structure and less spare parts, makes easier &
cheaper maintenance.
4.Heat-hardened spare parts,makes longer serving life and less
problem.
5.Thread connection for top sub and drive chuck,makes easier
disassembly
Product description
SOLLROC DTH hammers is designed around proven technology to perform
at the top end of the performance scale compared to other tools on
the market. These tools are excellent for all types of drilling
applications including residential geothermal, production quarry
drilling, seismic drilling and small construction drilling.
DTH Hammer specification:
Model: QL80A
| QL80A |
Length(less bit) | 1330mm |
Weight (less bit) | 17100kg |
External diameter | 185mm |
Bits shank | QL80A |
Bits diameter | 195-254mm |
Connection thread | API 4 1/2" Reg |
Air pressure | 1.0-2.5Mpa |
Face shape Features
Drop Center
For high penetration rates in soft to medium hard and fissured rock
formations. Low to medium air pressures. Maximum hole deviation
control.
Concave Face
The all-round application bit face special for medium hard and
homogenerous rock formations. Good hole deviation control and good
flushing capacity.
Convex Face
For high penetration rates in soft to medium-hard with low to
medium air pressures. It is the most resistance to steel wash, and
may reduce the load and wear on the gauge buttons, but poor hole
deviation control.
Flat Face
This kind of face shape is suitable for very hard and abrasive rock
formations in applications with high air pressures. Good
penetration rates an resistance to steel wash.
Double Gauge Face
This kind of face shape is suitable for fast penetration rates in
medium to hard rock formations. Designed for high air pressures and
good resistance to steel wash step gauge bit.
Product application
At present, DTH drilling tool is widely used in underground mining,
quarries, hydraulic and Hydro-Power Engineering, water well
drilling, Mineral exploration, anchoring hole drilling, geothermal
engineering, Subway excavation, another civil engineering.
DTH is one of the most efficient ways of drilling rock, using a
rapid hammer action to break the rock into sizeable chips which are
then evacuated from the bore hole by the air exhausted from the DTH
Hammer. The technique provides fast drilling of accurately aligned,
straight and clean holes in most ground conditions.
Company informaiton
At sollroc, customer satisfaction is our top priority. Our sales
team takes a proactive approach in meeting customers’ needs. We
take the time to get to know you and learn about your operations so
we can better assist you. We strive to meet customers’ needs by
supplying the tools and equipment you need when you need them,
providing product support, and following through with excellent
customer service every step of the way.