Black API 3 1/2''REG QL50 DTH Hammer With Foot Valve
|
Black Color Ql50 DTH Drill Hammer With Footvalve for Rock Drilling And Blasting
Product description Down-the-Hole drilling is one of the fastest, most dominant methods of geotechnical drilling. DTH drilling has many applications, including water well, oil and gas, blast hole and foundation drilling. This is an energy efficient form of wide-hole drilling (in the hole range of 100-254 mm) that can be performed in both a downward and an upward direction.
Working Principle The drill pipes transmit the necessary feed force and rotation to
hammer and bit plus compressed air or fluids for the hammer and
flushing of cuttings. The drill pipes are added to the drill string
successively behind the hammer as the hole gets deeper. The piston
strikes the impact surface of the bit directly, while the hammer
casing gives straight and stable guidance of the drill bit.
DTH Hammer specification:
Product Advantages: 1. Out of the trouble of foot valve fracture and expansion and
contraction.
Face shape Features Drop Center For high penetration rates in soft to medium hard and fissured rock formations. Low to medium air pressures. Maximum hole deviation control. Concave Face The all-round application bit face special for medium hard and homogenerous rock formations. Good hole deviation control and good flushing capacity. Convex Face For high penetration rates in soft to medium-hard with low to medium air pressures. It is the most resistance to steel wash, and may reduce the load and wear on the gauge buttons, but poor hole deviation control. Flat Face This kind of face shape is suitable for very hard and abrasive rock formations in applications with high air pressures. Good penetration rates an resistance to steel wash. Double Gauge Face This kind of face shape is suitable for fast penetration rates in medium to hard rock formations. Designed for high air pressures and good resistance to steel wash step gauge bit.
Product application At present, DTH drilling tool is widely used in underground mining, quarries, hydraulic and Hydro-Power Engineering, water well drilling, Mineral exploration, anchoring hole drilling, geothermal engineering, Subway excavation, another civil engineering.
DTH is one of the most efficient ways of drilling rock, using a rapid hammer action to break the rock into sizeable chips which are then evacuated from the bore hole by the air exhausted from the DTH Hammer. The technique provides fast drilling of accurately aligned, straight and clean holes in most ground conditions. Company informaiton At sollroc, customer satisfaction is our top priority. Our sales team takes a proactive approach in meeting customers’ needs. We take the time to get to know you and learn about your operations so we can better assist you. We strive to meet customers’ needs by supplying the tools and equipment you need when you need them, providing product support, and following through with excellent customer service every step of the way. |
||||||||||||||||
Product Tags: QL50 DTH Hammer API 3 1/2''REG DTH Hammer Black DTH Drilling Tools |
![]() |
10-500kgs Down The Hole Hammer With Special Steel For Well Drilling |
![]() |
100kgs DHD360 Hammer 1.0-3.0Mpa Working Pressure 3 1/2'' API REG Thread |
![]() |
QL Shank Down The Hole Hammer 2''-15'' Size for Water Well Drilling |
![]() |
SD Shank Down The Hole Hammer 1.0-3.0Mpa Working Pressure 10-500kgs Weight |
![]() |
Customized Color Mining Hammer With1.0-3.0Mpa Working Pressure |
![]() |
6 5/8''API Reg Down the Hole Drill Hammer Working Pressure 1.0-3.0Mpa |