101.6mm Dual Wall RC Drill Pipe With 4'' Remet Thread
|
4''-101.6mm RC Dual Wall Drill Rod With 4'' Remet Thread For RC Drilling
Product Introduce: Reverse Circulation RC Drilling Rods is also called Double wall drill pipe, double drill pipe or Dual Wall drill pipe. It consists of two layers of inner and outer drill pipes (called inner pipe and outer pipe). The inner and outer pipes constitute an annular gap, which is a channel for pumping the flushing medium to the bottom of the hole when hydraulic rock drilling and center sampling drilling. The central hole of the inner tube is fixed as a whole by discharging the flushing medium, and each double-walled drill pipe is connected with the screw of the outer tube to ensure transmission of torque and pressure. The inner tube is usually connected by a plug-in method, which generally only serves as a flushing medium. Therefore, a sealing device is required at the plug-in place. Specification: 4''-101.6mm RC dual wall drill rod SOLLROC Dual Wall RC Drill rod specification:
SOLLROC Dual Wall RC Drill rod specification:
Adavantages: 1.Heavy duty tool joints and superior manufacturing technique promise to make RC drill pipe the industry standard. 2.Inner tubes slide into place and seal with double o-rings as the threaded outer tubes are torqued together. 3.Abrasion-resistant alloy steel inner and outer tubes extend life of the drill pipe Working Principle: Reverse circulation is achieved by blowing air down the annulus of the rod, the differential pressure creating air lift of the water and cuttings up the inner tube which is inside each rod. It reaches the deflector box at the top of the drill string then moves through a sample hose which is attached to the top of the cyclone. The drill cuttings travel around the inside of the cyclone until they fall through an opening at the bottom and are collected in a sample bag. For any drill hole there will be a large number of sample bags, each one marked to record the location and drilling depth that the sample was obtained. The collected series of sample bag cuttings are later taken for analysis to determine the mineral composition of the drill hole. The analysis results of each individual bag represents the mineral composition at a particular sample point in the drill hole. Geologists can then survey the drilled ground analysis and make decisions about the value of the overall mineral deposit. Detailed Photo:
About us: SOLLROC Reverse Circulation drilling (RC) ,from size 3’’ to 5.5’’, is a technique of drilling that uses dual wall drill rods that consist of an outer drill rod with an inner tube. By using compressed air to extract rock fragments sample,the samples travel through rods to a sample splitter at surface, avoiding all contact between the samples and the borehole wall that allows samples to be retrieved with minimal contamination,which is mainly used in deep hole exploration and mining grade control.
Delivery Way: By Air, By express or By Sea
Quality warranty:
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Product Tags: 101.6mm Dual Wall RC Drill Pipe OD4'' Dual Wall RC Drill Pipe 4'' Remet Thread RC Drill Pipe |
![]() |
Dia 88.9mm Reverse Circulation RC Drill Rod For Mining |
![]() |
Diameter 114.3mm 4 1/2'' Metzke Thread RC Drill Rod |
![]() |
OD 4 1/2'' Metzke Thread Dual Wall RC Drill Pipe |
![]() |
Stainless Steel Metzke Thread RC Drill Pipe For Surveying |
![]() |
dia 101.6mm 6M 4 Inch Metzke Thread Dual Wall RC Drill Pipe |
![]() |
3M Length Diameter 101.6mm Reverse Circulation Drill Pipe |