Brass Adjustable Side exit Aircraft Cable Grippers With Round Steel Ball YW86063

Brass Aircraft Cable Adjustable Fittings Gripper With Round Steel Ball Plate At The End YW86063

Quick Details:

Advantages:

This Self-Gripping fixed swivel hanger can be used to hang artwork, pictures, or objects in a variety of ways

that include ceiling, sloped ceiling, arched or wall.
This Solo hanger can work with a 1~2 mm stainless steel cable in various lengths.
This item making this ideal for homes, offices, galleries, and public spaces.

Descriptions:

1. A great solution for flexibility with a minimum of installation needed. Perfect to hang from a ceiling, but also useful to hang on a small wall, columns, shop windows, and steel ceilings.

2. The Ceiling & Wall Cable System hanger offers the possibility to hang more than 1 object on the same cable to a total maximum of 20 kg per set.

3. A complete Ceiling & Wall Cable System set comes with everything you need to hang 1 pcs of art. Additional adjustable hooks are available.

4. Professional Exhibition Art Hanging System Gallery Large Picture, Painting, Photo Display Kit; Molding Hook with Twist Stainless Steel Wire

Installation:

Except for the ceiling attachments, our cable grippers are all fitted in the same way, and once installed, the full load is attached to the holder and will no longer move.
The cable in the ceiling attachments is held in with a stop ferrule, in all the others there are ball bearings that grip the cable.

To install the Grips, gently depress the spring-loaded plunger (the pipe sticking out of the cable holder) and insert one end of the cable into it.

Some of our grippers have a screw nut over the plunger. Where these are present, undo the screw
nut completely before depressing the plunger.

Thread the cable through the holder as required, but at least far enough to be able to clearly see it protrude from the other end of the holder.

Release the plunger to attach the load. The cable is gripped by ball bearings inside the fitting.

Once the holder is in the desired position, if it has a safety-nut, screw it down as far as possible by hand (do not use tools).

To adjust, simply reverse the procedure: completely unscrew the safety-nut, press the spring-loaded plunger with your finger. Move the holder up and down the cable as required. Screw the nut back again.

FAQ:

Do I need tools to adjustable the Gripper?

No, the Gripper mechanism is released by pressing the plunger manually.

Do I need a Safety Nut?

Most Grippers have optional “safety nuts” or “safety caps” to lock the mechanism off in both directions.

Are locknuts provided with Grippers?

Generally no, but Grippers with metric threads are supplied with a corresponding bolt or lock nut.

What components do I need to hang my fixtures?

You will need a ceiling attachment (cable coupler or connector), a cable with a terminal (stop sleeve), and a Cable Gripper, normally placed at the fixture. You may also need ceiling canopies and a power cord.

Can I install these myself?

Yes, if you’re a lighting professional or a competent handyman.

What types of Cable Grippers are available?

There’s a wide variety, but there are two distinct types. The Straight-Thru’ or standard Gripper allows the cable to exit through the Gripper’s thread into the fixture. The Side-Cable-Exit Gripper allows the cable to exit the Gripper from the side of the body before the Gripper enters the fixture, eliminating the possibility of a short circuit.