Self Locking Lighting Suspension Kits Up And Down Adjustable YW86010

Durability self-locking lighting suspension kits Up and down Adjustable YW86010

Specification:

Feature:

1. Fast and easy to suspend lighting fixtures during the installation;

2. Designed for the suspension of surface light fittings, suitable for use with a large range of commercial lighting;

3. No tools needed to adjust cable length, up or down, down or up – as often as you like;

4. Time-Saving: Allows quick installation and instant adjustment;

5. The finest way to suspend lighting fixtures available;

6. Quick to suspend lighting fixtures during the installation;

7. Stainless steel is available in various lengths;

8. Offer the perfect solution for the suspension of the fixtures.

Attention:

1. The ceiling fixing must be installed correctly and by a qualified fitter into a reliable material to achieve the working load;

2. Make sure to use a reliable and secure fixing for the object being suspended;

3. Not to be used outside;

4. Make sure the wire has no defects before use. Use only for static loads;

5. A minimum of two suspensions are recommended per item being suspended;

6. Always remove or support the load before making any adjustments;

7. Supplied in ready-to-use kits;

8. Available with a range of connector types and thread sizes;

9. Extensive ceiling fixing options available to suit most substrates.

How to use it?

• One end of the suspension kit screws to the ceiling, the other side attached to the panel.
• You can adjust the cable length by the gripper on both of the ends, no tools needed,
• Easy to adjust cable length. Easy to release.
• Perfect for the Hanging Graphics Displays, as well as Suspend Signage, Lighting Systems, Suspended Fixtures, and so on.
• This Wire Suspension Kit is designed for hanging small and light objects, 2 meters of this Wire suspension complete with fixings to allow Panel Lights to be suspended.

Important:

It is essential to check that the top ceiling fixings are strong enough to take the weight of the items being displayed while allowing for the tension in the cables.

Affix fitting (A) to ceiling: - for wooden ceilings use a wood screw. - for cavity ceilings use a spring toggle bolt. - for solid ceilings use a rawl plug and screw.

Since our wayfinding signage products are suspended from a ceiling it ensures maximum exposure.