Customize Size Cable Picture Hanging System Single Sided Panel Support

Top Panel Support Cable Display Components , Single Sided Panel Support​

Our side clamps are made from finely machined aluminum/brass with a very fine brushed surface.

Then these are finished in a clear anodized surface to maintain these attributes for years.

We think these are the best side clamps available on any continent.

The Side Clamp Grippers clamp material ≤8mm and is typically used with vertical signage or panels.

* There is no faster and more economical way than cable to hang

and change your banners and sale signs.

* Our Dispaly Suspension System offers a simple, highly versatile selection of components

for most materials, including glass, acrylic, metal, wood, foamcore and other media.

* The stainless steel cables are virtually invisible to the eye and the connecting

hardware is elegant and minimal, enabling the designer to create display

systems that appear to float in mid-air.

Description

INSTALLATION

1.  Attach a clamp support to each corner of the glass shelf at 3/4"-1" distance from edge

2.  Mark cable positions on floor area - Lay shelves on floor and mark cable positions,

or use measurements. With the use of a plumb line, mark and fix cables to ceiling

(ensuring that fixings are secure).

3.  Install cables.

4. Shelf fitting - As a guideline; the lowest shelf should be fixed approx. 24" from the floor,

and subsequent shelves approx 12" apart.

5.  Affix shelf to cables. Adjust shelf to a horizontal position; preferably with a spirit level.

6.  For proper and easier installation it will require two people.