Steel Wire Sling / Wire Rope Choker Sling Customize Length For Suspension Sets

Ø 1.5 mm Stainless Steel Wire Rope Sling With Loop End For Suspension Sets

This wire rope sling is a part of the suspension set.

7X7 304 Stainless Steel Wire,with diameter of 1.5mm, 

 Ball shape die casting on one end,loop end on the other end.

The ball die casting size is Ø5.5mm,with a loop end,which can hang the objests.

Used for applications where you have a hight ceiling, curved or slope ceiling or difficult installation.

Description

End Fittings and Hardware Available:

1. Custom Machined End Fittings
2. Stop Sleeves
3. Button Stops
4. Ball Fittings
5. Cylinder
6. Threaded Studs
7. Hooks
8. Shackles
9. Wire Rope Clips
10. Turnbuckles
11. Thimbles

Assembly Tolerances

Overall length tolerances required for cable assemblies and cut lengths of cable often dictate the production method to be used and thus the cost. Close tolerances frequently result in higher costs for both production and quality assurance. The allowable tolerance and inspection methods should be reviewed and agreed upon with our prior to production.

Breaking Strength Safety Factor

In determining the working load of a cable or wire rope, the direct stress plus the shock in bending

loads must be considered. To assure long life, a reasonable safety factor should be applied to the

working load. Standard industry practice is a 5:1 safety factor for many applications. Higher safety

factors are used under certain conditions such as extreme shock loads, aircraft control cables, etc.

The fatigue life of the cable or wire rope will be greatly enhanced with properly designed pulleys.

The root, or pulley tread diameter, is critical to the life of the cable.

Cable:

Our 7x7 and 7x19 construction, stainless steel, and galvanized aircraft cable are primarily used for thelanyards. If required, lanyards can also be manufactured using PVC or nylon-jacketed cable, which are available in a diverse collection of jacket colors including clear.

Standard fittings:

In order to provide our customers with a quick turnaround on standard lanyards, we provide a complete range of off-the- shelf fittings available in various materials. Some standard fittings include threaded studs, oval sleeves, stop sleeves, button stops, ball fittings, eyelets, tabs, and thimbles.