ODM Single Mode Fiber Patch Cable

12 fiber pulling type female MPO MTP Single Mode APC Fiber Patch Cables for QSFP 40 / 100 Gb

single mode pulling type MPO MTP connector is a new type of MPO MTP , it add a pull and push tab on it . the normal MPO need to hold whole connector to pull out from equipment , but the pulling type MPO MTP only need to pull the tab then can be very easy to take out it . it will help you lots when you construct or make a change in data center or other place  . 

Single mode type MPO MTP connectory have high return loss  , especial APC type MPO MTP , it can have more than 55dB return loss  . 

This MPO MTP patch cord is B method . it is different with A and C method  . we need to know the method that you need for the patch cord ,also should to indicate the male or female MPO MTP .

Parameter 

Method B

How to order

1. Connector type : SC / FC / LC / ST / MPO / MTP / MU / MTRJ / E2000 / SMA
2. Mode type : single mode ( UPC and APC ) / multi mode ( PC )
3. Cable diameter : 0.9 / 2.0 / 3.0 mm ( can customized other diameter )
4. Coating material : PVC / LSZH
5. fiber count : simple / duplex / 4 core / 6core / 8 core /12 core / 24core/48 core / 96 core and so on
6. Cable type : G652D / G657A1 / G657A2 /G655 / OM1 / OM2 / OM3-150 / OM3-300 / OM4 /OM5
7. Patch cord length : according to your requirement
8.MPO/MTP connector should let us know which method ( A type / B type /C type ), male or female , fiber count (4/8/12/16/24/32 fiber )