Hot Dipped Galvanized 10"X2" Brick Wall Reinforcing Mesh 9 Gauge

Hot Dipped Galvanized 9 Gauge Brick Wall Reinforcing Mesh

Masonry mesh, also called masonry wall reinforced mesh, is used for concrete construction reinforcement, normally used for the wall reinforcement. It is a welded and fabricated steel reinforcing structure which is laid in the bed joint to strengthen masonry panels without thickening the wall. It can prevent or reduce cracking in walls by bonding the masonry units together so as to strengthen the masonry panel where it is installed.

Product Specification

Ladder mesh

• Material: Low carbon steel wire, stainless steel wire, galvanized steel wire. Welded before electric-galvanized.
  Welded after electric-galvanized.
  Welded before hot dipped galvanized.
  Welded after hot dipped galvanized.
  Welded by stainless steel wire.
  Galvanized steel, stainless steel for Expanded Metal Reinforcement

Truss mesh reinforcement

• Ladder mesh width: 4" – 16".
• Light ladder mesh: wire 9 ga. side rods × 9 ga. cross rods.
• Heavy ladder mesh: 3/16" side rods × 9 ga. cross rods.
• Super heavy duty ladder mesh: 3/16" side rods × 3/16" cross rods.
• Standard length: 10' (3.05m).

T shape masonry mesh

• Wire diameter: 2.5mm - 8.0mm.
• Typical use: it can be used for brick wall corner reinforcement because of its typical T shape.

Brick welded mesh

• Wire diameter: 2.5mm - 8.0mm.
• Length: as your requirement.
• Typical use: in rolls, it can be cut and bent easily.

Expanded Metal Reinforcement

• SWD x LWD: 15x25mm
• Width: 65mm, 100mm, 175mm, 225mm, 300mm
• Length: 20m

Features

• High rigidity, strength and stability.
• Welding spots of warp wire and weft wire are on the same surface.
• Continuous length of joint reinforcement.
• Corrosion and rust resistant.
• Durable and long service life.

Packaging & Delivery

• 50 pieces per bundle, 20 bundles per pallet. (North America market)
• 25 pieces per bundle, 40 bundles per pallet. (Europe market)

All ladder mesh products conform to:

ASTM A641 - (Electro  galvanized )
ASTM A153 Class B2 - (Hot dipped after fabrication)
ASTM A 82 - (Cold drawn steel wire)
Tensile Strength:80,000 PSI;Yield Point:70,000 PSI minimum; Reduction of Area:30 %.
ASTM A951-96 - (Masonry wall reinforcing)
ASTM 580 Type 304 - (Stainless steel)

Ladder mesh reinforcement also called Brick Wall Reinforcement Mesh is welded wire sheet for reinforced masonry construction. It is used in building surface, wall, ground, bridge, bank and airport. And its feature is that welding spots of warp wire and weft wire are on the same surface.

Wire Diameter: 2.5-6.0 mm
Width: 5cm-27cm
Length: 3mm.
Spacing: 40cm

Surface Treatment of Ladder Mesh: Can be divided into five types:
Welded after hot dipped galvanized;
Welded after electro galvanized;
Welded before electro galvanized;
Welded before hot dipped galvanized;
 Welded by stainless steel wire.

General Technical Information:
Weight: 2kg-10kg.
Usage: Masonry wall construction.
Materials Available: hot dipped galvanized steel, electro galvanized steel or stainless steel. Wire diameter: from 2.5mm to 6mm.
Truss Mesh Structure Width: 5cm, 10cm, 15cm, 20cm.
Structure Length: 3mm.
Wire Spacing: 40cm.