Hot Dipped Galvanized Plate Perforated Metal Mesh Safety Grating Walkway Anti - Rust

Hot Dipped Galvanized Plate Grip Strut Grating Walkway Anti-Rust

Grip Strut Safety Grating plank is an excellent slip resistant material that is low in material cost, as well as installation cost. This planking, at 2" deep x 14 gauge and 4-3/4" wide (2 diamond), provides maintenance-free open design for drainage of fluids, chips, grease, mud and snow. The serrated surface grips soles securely-in all directions-in practically every place. High strength-to-weight performance is achieved through depth of section and structural design. Light and easy to handle, this helps in quick installation, that usually can be handled by one person. Available in pre-galvanized and hot rolled pickled and oiled (HRPO). Standard lengths are 10' and 12', with the ability to run up to 24' on certain sizes. Please check with your P&R representative for more information.

• All Guorun safety gratings are also available as flat blanks without folded edges.

• In that case, the maximum embossed field width must not be greater than 750 mm for diamond forms.

• For manufacturing reasons, these flat cuts have a slightly curved finish.

• Gratings with other dimensions (H/W/L) than those mentioned above can also be produced.

• Gratings with unperforated edges or surfaces on one or both front surfaces are also available.

• We can also be supplied with ø 5-mm drain holes.

• Please contact us for further technical questions.

Materials of grip strut plank grating, stairs trends grating

1. Pre-Galvanized Steel (ASTM A-924-G90): 12 Gauge or 14 Gauge.
2. Hot Rolled Steel: 12 Gauge or 14 Gauge.
3. Aluminum Alloy 5052H32: 0.080" Thick or .100" Thick .
4. Stainless Steel Type 304 or Type 316: 16 Gauge.

Applications of Grip Strut Plank
Grip Strut Plank can be made out of iron plate, aluminium plate or stainless steel plate, etc, based upon different working environments. If iron plate is used, when grip strut plank is ready, it can be electro-galvanized, hot dip galvanized or spray-painted. Grip strut plank has nicer skid resistance and beautiful look, so it is widely used as stair tread, walkway and workshop floor in factories and transportation facilities, etc. When grip strut plank is covered with mud, ice, snow, grease, oily soil or cleaning media, grip strut plank can efficiently safeguard the safety of operating personnel.

Characteristics of the perforated Grtp Strut Grating:

With non-slip, anti-rust, anti-corrosion, durable features and beautiful appearance. Punching hole type with raised herring

bone, raised crosswise, round, crocodilelips type, tear-type. These hole types are all CNC punching holes.

Advantages of grip strut grating

Economical to install In addition to low material cost and nominal erection cost, Grip Strut safety grating also helps save with its long-lasting, rust-resisting materials and finishes.

• Standard mill-galvanized finish resists corrosion to help provide lasting surfaces.

• High-strength aluminum and Types 304 and 316L stainless steel help provide maximum corrosion resistance.

• Black unpainted steel available for installations requiring hot dipped galvanized finish after fabrication.

• These light weight yet brawny panels permit substantial reduction in structural steel requirements.

Feature advance:

1, low cost, zinc plate is cheaper compare to after hot dipped galvanized

2, easy install, but need think about carrying capacity

3, anti-skid effect is best, there are 14 teeth around one hole, getting hold of the shoes sole when you stand in walkway.

4, low maintain cost.