Electric Spot Wire Mesh Welding Machine/Fence Panel Welding Machine
1.Feeding material:The warp wire and weft wire are straightened and cutted from coil
wire material ,realized by auto straightening and cutting machine.The warp wire are placed on a corresponding wire penetrating mold
by worker, and the weft wire will be automatic falling down one by
one ,from the weft wire system
2.Welding mesh panel system:The main machine starts welding and adopts a synchronous control
technology, both branch control welding time and welding time are
controlled by a Panasonic ( Japan ) PLC digital programming system,
and the mesh opening size can be adjusted only by direct input on a
touch screen; and it could be exist different weft distance on one
piece of one mesh sheet
3.Drawing mesh panel system:Panasonic ( Japan ) servo motor controls the whole automatic mesh
panel drawing process until one mesh panel finished, and the
automatic mesh connecting and discharging system is started; the
welding of the next mesh is started. | Model | QJ-04 | Welding electrodes | 48pcs | | Wire diameter | 2.5mm-6mm | Welding speed | 50/75times/min | | Longitude wire space | 50mm-300mm | Rated electrical power | 125kva*6pcs | | Cross wire space | 25/12.5mm-300mm | Needed power | Min.160kva | | Width of mesh | Max.2.5m | Weight | 4.2T | | Length of mesh | Max.6m | Overall size | 5.4m*3.2m*1.7m | | Longitude wire feeding | Pre-straightened&pre-cut | Cross wire feeding | Pre-straightened&pre-cut |
Wire diameter: 1.8-3mm/2-3.5mm/2-4mm
Longitude wire space: 50-200mm
Cross wire space: Min.25mm/12.5mm
Mesh width: Max.1.2m, max.1.6m
Longitude wire feeding: automatic from coils
Cross wire feeding: automatic from coils
Mesh pulling: Panasonic servo motor
Welding speed: 60-120 times/min
Mesh type: panel mesh or roll mesh
Notes:when wire diameter is 2.5mm-5mm,the minimum longitude wire space is
50 mm.One transformer controls 8 welding electrodes,you can use max
48 pcs. when wire diameter is 5mm-6mm,the minimum longitude wire
space is 100mm.One transformer controls 4 welding electrodes,you
can use max 24 pcs.
Applications Application materials : welding machine is good at welding various
metal wire : stainless steel wire , low carbon steel wire , round
steel bar, ribbed steel bar
Application mesh panel : welded mesh panel widely used as reinforce
mesh panel for building, construction ;railway wire mesh fence,
security fence and others.
Welded fence mesh panel welding machine
Fence mesh panel welding machine, also called security fence
machine, anti-climb fence welding
machine, used to make fence mesh, road mesh, reinforcing mesh,
shelf, explosion-proof wall etc.
Machine Image
Panasonic, Schneider, ABB, SMC, Igus electric components.
Touch screen interface.
PLC control of cross wire space and welding current.
Pre-straightened & pre-cut wires.
Panasonic servo technology for mesh pulling.
Pure welding electrodes, upper Φ20*120mm, lower 20*20*20mm.
Water-cooling system.
Brake motor & reducer connect the principal axis directly.
High precision mesh
Fence Mesh Welding Machine Function features and advantages:
1. This machine adopts electrical & electronic synchronous
control technique, both separate-phases welding and welding time
composed of digital and integrated electric circuit. The input
panel has two types touch screen and button, more intelligent and
rational, once pressing, and separate welding.
2. The welding power is electric power. The cross wire is fed from
hopper driven by stepper motor, and the line wire is fed by brake
motor driven car and the mesh is pulled by the stepper motor driven
car.
3. The cross and the line wires are both pre-straightened and
pre-cut by the special straightening and cutting machine.
4. The biggest advantage of the machine is that there is different
cross spacing in the same mesh.
5.The welding electrodes and transformer are equipped with the
water cooling system,thus prolong the machine life and working
time. |
