Welded Construction Panel Roll Fence Mesh Welding Machine Automatic 1-6m Width

Welded Construction Panel Roll Mesh Welding Machine Automatic and PLC Control

1. Feeding material:

The warp wire and weft wire are straightened and cutted from coil wire material ,realized by auto straightening and cutting machine.

The warp wire are placed on a corresponding wire penetrating mold by worker, and the weft wire will be automatic falling down one by one ,from the weft wire system
2. Welding mesh panel system:

The main machine starts welding and adopts a synchronous control technology, both branch control welding time and welding time are controlled by a Panasonic ( Japan ) PLC digital programming system, and the mesh opening size can be adjusted only by direct input on a touch screen; and it could be exist different weft distance on one piece of one mesh sheet
3. Drawing mesh panel system:

Panasonic ( Japan ) servo motor controls the whole automatic mesh panel drawing process until one mesh panel finished, and the automatic mesh connecting and discharging system is started; the welding of the next mesh is started.

Details

 
 
Wire diameter: 1.8-3mm/2-3.5mm/2-4mm
Longitude wire space: 50-200mm
Cross wire space: Min.25mm/12.5mm
Mesh width: Max.1.2m, max.1.6m
Longitude wire feeding: automatic from coils
Cross wire feeding: automatic from coils
Mesh pulling: Panasonic servo motor
Welding speed: 60-120 times/min
Mesh type: panel mesh or roll mesh
 
Notes:when wire diameter is 2.5mm-5mm,the minimum longitude wire space is 50 mm.One transformer controls 8 welding electrodes,you can use max 48 pcs. when wire diameter is 5mm-6mm,the minimum longitude wire space is 100mm.One transformer controls 4 welding electrodes,you can use max 24 pcs.