Brick Concrete Compression Testing Machine Cement Stone Building
Material Test
Concrete Compression Testing Machine Introduction :
concrete brick compression testing machine is mainly used for
brick, stone, cement, concrete and
other building materials, compressive strength test,also used to
test the compressive performance of other matrials
Concrete Compression Testing Machine specifications:
| Model No | PT-YA-2000 |
| Machine Name | Brick Concrete Compression Testing Machine Cement Stone Building
Material Test |
| Max load | 2000KN |
| Test force measuring range | 4%-100%FS |
| Test Force showed the relative error | ≤indicating value±1% |
| Test Force Resolution | 0.03KN |
| Hydraulic pump rated pressure | 40MPa |
| Upper and lower bearing plate size | 320*260mm |
| Maximum distance between the upper and lower plate | 330mm |
| Piston diameter | φ250mm |
| Piston stroke | 50mm |
| Motor Power | 0.77 kW |
| Outside dimension (l*w*h) | 640×720×1500 mm |
| Weight | 2000kg |
Hydraulic System :
The hydraulic oil tank driven by high-pressure pump into the motor
oil, flows through the unidirectional valve, high pressure
filter, pressure valve, servo valve, into the cylinder. Computer
control signals to the servo valve,Control direction and opening of
the servo valve, to control the flow into the cylinder, achieve
constant test force control.
Control system :
System including digital servo valve, high-precision sensors,
controllers and software, high control precision and
reliability. Meet GB, ISO, ASTM and other standards for cement,
mortar, concrete and other materials testing
requirements.
