SMT Mounting Machine: 68 Nozzles, 0.02mm Precision, 250000CPH Speed
PCB assembly machine Technical Parameter Dimension | Length | 2700mm | Width | 2300mm | Height | 1550mm | Total weight | 1700kg | PCB | Length Width | Max:1200*330mm Min:100*100mm | Thickness | 0.5-5mm | Clamping | Adjustable pressure pneumatic | Mounting mode | Group to take and group to mount. | Vision system | No.of camera | 5 PCS | Feature of camera | Vision alignment,MARK correction | Mounting precision | ±0.02mm | Mounting height | ≤5mm | Mounting speed | 250000CPH | Feeder station | 68 PCS | Nozzles | 68 PCS | components | LED3017,3020,3528,5050 and resistor,capacitor,bridge rectifiers. |
SMT SMT is Surface Mount Technology (surface mount technology), which
is the most popular technology and process in electronic assembly
industry. It is a pin-free or short-lead surface assembly components
(SMC/SMD, Chinese known as chip components) installed on the
Printed Circuit Board (PCB) surface or other substrate surface,
welded and assembled by reflow or dip welding and other methods of
circuit installation technology. Application production&component The mahcine mainly mounting linear produce,such as tubes, flexible
strips, panel lights, display screens,etc. Honor client ETON with more than 10 years experience in SMT LED manufacturer are
our partners in China. Some details of the machine Service Maintenance Period: 1 year.(whole machine, any parts need to be
repaired or replaced will be free) Upgrade the software will be free Visit customer regularly and gather information. Provide latest information about technology and equipment. Related SMT machine: We can provide you a whole SMT line solution and equipment, you can
look this picture, we have semi-auto/full-automatic stencil
printer, glue dispenser(this machine is mainly for making led
lens), conveyor, reflow oven, etc. We can meet your any demands for equipment, and pursue quality
higher than price for machine manufacturing.
Step of repairing LED chip Lamp bead damage LED light after the light is turned on, some lamp
beads are not bright, basically you can judge that the lamp bead is
damaged. The damaged lamp bead can usually be seen by the naked eye
- there is a black spot on the surface of the lamp bead, indicating
that it has been burned. Sometimes the lamp beads are connected in
series and then in parallel, so the loss of a lamp bead will cause
a lamp bead to be not bright. We offer two repair options depending
on the number of damaged beads. If only one or two lamp beads are broken, we can repair them in
these two ways: 1. Find the broken lamp bead and short-circuit it
by connecting a wire to the metal at both ends. The effect of this
is that most of the lamp beads can light up normally, only the
broken individual lamp beads are not bright, and the impact on the
overall brightness is not large. 2. If you have strong hands-on
ability, you can go online to buy the same model of lamp beads (ten
yuan a large bag), and replace them yourself - use an electric iron
(a hair dryer to blow for a while) to heat the old lamp beads until
the glue on the back of the old lamp beads melts, and remove the
old lamp beads with tweezers (do not use your hand, too hot). At
the same time, install the new lamp beads while it is hot (pay
attention to the positive and negative poles), and it is done! If a large number of lamp beads are damaged, it is recommended to
replace the entire lamp bead board. Lamp bead board is also sold on
the Internet, pay attention to three points when buying: 1. Measure
the size of their own lamps; 2. Look at the appearance of the lamp
bead board and the starter connector (explain later); 3. Remember
the output power range of the starter (explained later). The three
points of the new lamp bead board must be the same as the old lamp
bead board - the replacement of the lamp bead board is very simple,
the old lamp bead board is fixed on the lamp base with screws, and
can be directly removed. The new lamp bead board is fixed with a
magnet, and the new lamp bead board is removed when replaced, and
the connector of the starter is connected. Most of the failures of
LED lights are in the starter - if the light is not bright at all,
or the lamp flashes after the light is turned on, the overall
failure of the lamp is nine times out of ten. The starter can not
be repaired, can only be replaced, fortunately, the new starter is
not expensive. Pay attention to three points when buying a new
starter: 1. Pay attention to the appearance of the connector - the
appearance of the starter connector is as follows (if the starter
is a male head, the lamp bead board is a female head; 2. Remember
whether your lamp can change color and change several colors. The
new starter must have the same amount of discoloration as the old
starter. 3. Remember the output power range of the starter - a
range will be marked on the starter, as long as the power of the
lamp bead board is within this range
Contact David Whatsapp/Wechat/Tel: +86 13827425982 E-mail: david@eton-mounter.com
|