CCC SIRA 260mm Strip Light Stencil Printing Machine For No Wire
For any length flexible strip printing China first no-wire strip
light stencil printing machine
Introduction
Placed in front of the SMT production line placement machine, it is
mainly used to print the solder paste on the FPCB board. It is
suitable for 25/50/100M wireless printing. The PCB soft board is
supported by the platform's lifting and tensioning method. For its
fixation, it is fixed by side clamps by the cylinders on both
sides.
Technical parameter
| Screen frames max size | 850mm |
| Screen frames min size | 550mm |
| Screen frames thickness | 25-45mm |
| FPCB max size | 50mm |
| FPCB min size | 260mm |
| FPCB thickness | 0.5-5mm |
| Squeegee speed | 6-300mm/sec |
| Cleaning system | Manual cleaning |
| Printing accuracy | ±0.025mm |
| Cycle time | ≤9s (Exclude Printing & Cleaning) |
| FPCB transport over plate height | 20mm |
Features
It is the latest technology in the world and can be used for
printing with 100 meters without wires. Continuous printed flexible
circuit board;
The high-precision bidirectional camera is adopted, it can be
irradiated up to the steel mesh down to the FPCB board, and the
servo motors used in the X and Y axis of the camera adopt the
Inovance/Panasonic brand;
Two sets of independent stepping motor drives, so that the front
and back pressure of the squeegee can be adjusted separately, so as
to ensure that the front and back printing does not cause
inconsistency due to the deformation of the squeegee material;
The software is independently researched and developed by our
company and has exclusive characteristics. It can automatically set
the track width to ensure the consistency of the position.
Scope of application
It has the characteristics of continuous printing and is suitable
for factories that specialize in small-scale or large-scale
production of long flexible light strips (the length of FPCB board
can be 100 meters)
Details of machine
Company information
Certificate
Packing and delivery
FAQ
Since it is a fully automatic printing machine, how do you add
solder paste and change the stencil?
You still have to manually add solder paste and change the stencil.
Fully automatic does not refer to this aspect, but after you set
the program (such as: the length and width of the track, the angle
of the scraper, etc.), the printing machine can automatically
perform Printing, without manual loading and unloading etc.
When we need to change the line, what aspects of the machine need
to be adjusted and how long will it take?
Only need to adjust the PCB board and stencil to change the line,
usually can be completed within five minutes.
Which method is used to clean the stencil and how long is the
printing cycle?
Through manual cleaning, the printing cycle is about 9 seconds
(including printing and cleaning).
