131 - 140 of 313
electrical testing instruments
Selling leads
|
... 10 times from a height of 150mm onto the cooking zone of hob element, and the hob surface shall not crack and the appliance shall withstand the ...
2025-10-30 00:16:30
|
|
IEC60065 Mandrel Test Equipment for Insulation Film Mandrel / Mechanical Strength and Abrasion Test 1. Introduction of Mandrel Test Equipment Mandrel ...
2024-12-09 18:47:52
|
|
IEC60335-2-17 Figure 112 Spark Ignition Test Apparatus for Testing Flame Resistance of Flexing Parts 1. Introduction The spark ignition test apparatus ...
2024-12-09 20:30:55
|
|
...IPX1 and IPX2 testing, R600 oscillating tube for IPX3 and IPX4 testing, and jet hose nozzles for IPX5 and IPX6 Testing. The main function of this ...
2026-07-02 00:32:11
|
|
ISO6722-1 Motor-Driven Scrape Abrasion Test Apparatus for Testing Auto Cables 1. Introduction The scrape abrasion test apparatus is designed to meet ...
2026-07-02 00:32:11
|
|
IEC62196-1 Clause 26.4 EV Plug and Vehicle Connector Cable Bending Test Apparatus for Flexing Test 1. Introduction of cable bending test apparatus ...
2026-07-02 00:32:11
|
|
...Test Probe Kits for Verification to Openings in Enclosures of ME equipment 1. Introduction The test probe kits are meet the requirement of ...
2026-07-02 00:32:11
|
|
...accessbility to hazardous parts of electrical and electronic devices. This probe is widely refered by IEC60335-1, IEC62368-1, IEC60598-1 and other ...
2025-06-21 00:12:34
|
|
Test Apparatus for Plug Gripping Test 1. Introduction The test apparatus for plug gripping test is designed to meet the test requirements of IEC60884...
2025-08-08 16:59:14
|
|
Static Wind-Force Test Apparatus IEC60598-2-3 for Testing Lighting Fixture 1. Introduction The static wind-force test apparatus is designed to meet ...
2025-08-30 04:44:30
|