121 - 130 of 277
electrical testing instruments
Selling leads
|
IEC62196-1 Clause 26.4 EV Plug and Vehicle Connector Cable Bending Test Apparatus for Flexing Test 1. Introduction of cable bending test apparatus ...
2025-07-13 00:07:38
|
|
...accessbility to hazardous parts of electrical and electronic devices. This probe is widely refered by IEC60335-1, IEC62368-1, IEC60598-1 and other ...
2025-06-21 00:12:34
|
|
Luminaire Short Circuit Protection Test Chain with Resistance Value of 2.5Ω/m±20% 1. Usage 1). The resitance value of the test chain should be checked ...
2024-12-09 18:50:48
|
|
5V / HB/ V-0/1/2 UL94 Vertical and Horizontal Flame Test Apparatus Lab Testing Equipment 1. Introduction of Flame test Apparatus Horizontal and ...
2024-12-09 19:02:52
|
|
IEC62560 Bending Moment Test Device for Testing the Lamp at Lampholder 1. Introduction The bending moment test device is applied to test the bending ...
2024-12-09 20:34:26
|
|
Dielectric Strength Test Device with 30N Loaded Hardened Steel Pin IEC60335-1 clause 21.2 1. Introduction The dielectric strength test device is ...
2024-12-09 21:57:15
|
|
...31clause 5.3/figure A.1, IEC60320-1 clause 23.2, IEC60598-1 clause 4.13.5, IEC60884-1 clause 24.2 for repeat free fall test. The free fall test is ...
2025-01-09 00:03:09
|
|
...IEC60529, IEC60598-1, GB4208, and GB7000.1 standards. It is suitable for the drip level waterproof test of outdoor electrical and electronic ...
2025-07-13 00:07:38
|
|
IEC60335-2-11 PLC Single Station Endurance Tester for Washing Machine 1. Introduction: Endurance tester is designed according to IEC60335-2-11 and ...
2024-12-09 18:22:24
|
|
Aluminum Sauce Pans for Gas Burners EN30-1-1 Annex C.1 with Lids 1. Introduction The Standard aluminum sauce Pans are designed according to EN30-1-1 ...
2024-12-09 18:56:04
|