15 Degree Tilted Vertical Rain Drip Box Testing Equipment For IPX2 Testing

15 Degree Tilted Vertical Rain drip Box Testing Equipment for IPX2 Testing

1. Introduction

The IPX2 waterproof testing equipment request Vertically dripping water shall have no harmful effect when the enclosure is tilted at an angle up to 15° from its normal position. Test duration: 10 minutes (2.5min in each of 4 fixed positions of tilt). Water equivalent to 3 mm/minute.

The IPX1 waterproof testing equipment request the dripping water (vertically falling drops) shall have no harmful effect. Test duration: 10 minutes, equivalent to 1 mm / minute.

IPX1-2 Vertical Rain Drip Box Waterproof Testing Equipment is designed according to IEC60529 clause 14.2.1 and 14.2.2. It is applied to simulate the conditions of vertically dripping and dripping with 15 degrees tilted, and then to verify if the products ( electronics, luminaire, electric components, auto parts and etc.) can meet the requirements for IPx1 or IPX2 tests. The equipment can be customized according to size of test specimen. he aperture of nozzle is Φ0.4mm, distant of drip nozzle is 20mm, sample can be over 50kg. Adopts floor-stand structure and equip with 4 casters to make the equipment can move freely.

2. Specification

3. Frequently Asked Questions 

1). Does the equipment can be customized to fit with larger specimen? 

Pego: Yes, the drip board can be customized, just let us know the maximum dimension of your specimen. 

2). Can we customize the bearing capacity of the turntable?

Pego: Yes, the regular turntable can bear the samples with a weight less than 50KG, but we support the customize service.

3). What kind of water can be used?

Pego: Fresh water, however, the test water may be different depending on the product standards and test purposes.The purity water is recommended on prior, this will reduce the risk of nozzle clogging. But in practice, the tap water is used at most, the equipment configures 2 water filter.

4). What should we do if the needle is clogged?

Pego: the blue needles can be replaced easily, just screw-out the needle and replace a new one. 100 spare needles will be sent with the goods.

5). Can the water recycled?

Pego: No, this is an open type equipment, the water cannot be recyled. But we have the chamber type equipment for option.

6). Will you provide the on-site installation service?

Pego: Actually, the equipment will no need on-site installation service. The equipment will be shipped almost as a whole, user just need to make simple wiring connection when receive the goods.

7). What is the warranty period? and how can we get the after-sales service?

Pego: The warranty period is 12 months upon user receive the goods. 95% of after-sales problems can be solved by our engineer team through remote service. Customers will get a response within 24 hours in business day after reporting the problem. In our experience, most of the troublesome can be removed with the guidance of our engineer, only a small part of the troublesome are caused by parts failure, that is because we use the branded components, which have better performance and good reliability. If the parts damaged, we will a send a new for replace, the new parts will be charged for free within the warranty period. And also our eigneer team will teach how to replace the damaged parts.