ISO11925-2 Building Material Flammability Tester PLC Control Stainless Steel Combustion

1). Completed designed according to ISO11925-2 figure 1

2). Material: made of stainless steel sheet with thickness 1.5mm

3). the heat-resistance glazed doors are installed on front and right-side panels

4). Outer dimension: W1000mm*D400mm*H810mm

5). Ventilation of the enclosure shall be free through the square box section base in the bottom of the chamber, the air vents consist of 5cm*5cm open squares (made of 1.5mm thickness stainless steel and 50cm in height) to keep the air flowing smoothly.

1). The burner is completed designed according to ISO11925-2 figure 2

2). The burner shall be mounted onto a horizontal plate so that it moves smoothly forwards and backwards in a horizontal plate along the centreline of the combustion chamber

3). The burner can be used vertically or be tilted at 45° with respect to the vertical axis

1). The specimen holder is completed designed according to ISO11925-2 figure 3, and vertical installed as per figure 4

2). consisted by 2 stainless steel U-sharped frames, the frame has a thickness of 5±1mm,the two halves of the specimen holder shall be held together by screws or clamps to prevent the specimen warping.