120mm Aluminum Hob Element IEC60335-2-6 for testing induction hotplates
|
Detailed Product Description
|
Standard Aluminum Hob Element Works with Sand as per IEC60335-2-6 Chapter 21
1. Introduction The hob element is designed according to IEC60335-2-6 and IEC60335-2-9 chapter 21. The hoe element is made by aluminum with diameter of 120mm±10mm, its edges being rounded with a radius of at least 10mm, it is uniformly filed with at least 1.3kg of sand or shot so that the total mass is 1.8kg±0.01kg.
2. Parameter
3. Drawings
|
||||||||
| Product Tags: Testing Induction Hotplates Aluminum Hob Element 120mm Aluminum Hob Element IEC60335-2-6 Aluminum Hob Element |
Related Products
|
AS/NZS 5263.0 Flue Gas Sampling Hoods For Determination Of C0/CO2 Ratio For Burners |
|
GB 40876 Stainless steel Standard Pans for Testing Commerical Induction Cookers |
|
AS/NZS 5263.0 Aluminum Standard Test Vessels for Testing Hotplate Burners and Gas Burners |
|
EN 60350-2 Stainless steel Standardized Cookwares for Measuring the Energy comsuption o f Hobs |
|
EN 60350-2 Low Carbon Steel Test Saucepan For Assessing The Ability Of Hotplate To Heat Water |
|
EN30-1-1 Standard Aluminum Sauce Pans With Lids For Testing On Gas Burners |
Email to this supplier