High Temperature Battery Testing Machine PLC Man - Machine Interface Control

Test objective: This machine is suitable for lithium battery (or battery pack) burning

resistance test

Test description:

(1),The lithium ion battery or the battery pack is placed on a steel wire gauze. The wire gauze is located on the round hole,which has a diameter of 4 inches(102mm ) .The wire gauze is composed of

wire with 20 mesh per inch.It has a diameter of 0.017 inches(0.43mm).

(2),The wire gauze is placed at a distance of about 38mm above the flame.

(3),Cover an octagon aluminium wire netting around the sample.The aluminium wire netting specifications: distance on both sides parallel to each other is (610 + 10) mm ,height is (305 + 5) mm. aluminum wire has a diameter of 0.25mm ,mesh number is 16~18.

(4),To ensure that the test sample is heated on the wire net until explosion or the lithium battery (battery pack) is ignited and burned out.

Test results: After the test, the components of the battery (except for dust products) or the whole battery may not penetrate the aluminum mesh.

Standard:

UL 2272-2016 Outline of investigation of electric balance car

UL 2271-2013 Battery for light electric vehicle

GB/T 31241-2014 Safety requirements for lithium ion battery and battery pack for portable electronic products

GB/T 18287 -2013 External short circuit requirements of General specification for lithium ion batteries

for cellular telephones

GB/T 8897.4-2008 The fourth part of the primary battery safety requirements of lithium batteries

YD/T 2344.1-2011 Lithium iron phosphate batteries for communication - part one: integrated batteries

GB/T 31485-2015 Safety requirements and test methods for power batteries for electric vehicles

GB/T 21966-2008 Safety requirements for lithium primary batteries and batteries in transit

MT/T 1051-2007 Lithium ion battery for miner's lamp

YD 1268-2003 Safety requirements and test methods for lithium batteries and chargers for mobile communication handsets

GB/T 19521.11-2005 Safety code for inspection of hazardous properties of lithium batteries

YDB 032-2009 Backup lithium ion battery pack for communication

UL 1642:2012 Lithium battery standard

UL 2054: 2012 Household and commercial storage battery

UN38.3(2012) Recommendations on the transport of dangerous goods - Test and standard manual part 3

IEC62133-201 Safety requirements for battery and storage battery with alkaline

or non acid electrolytes

IEC 62281: 2004 Safety requirements for lithium primary batteriy and battery pack in transit

IEC 60086: 2007 Primary battery part 4 safety requirements of lithium battery

GJB150,GJB360,GJB548,GJB1217,MIL-STD-810F,MIL-STD-883E etc.test specification.

Product structure feature:

1,The box is made of stainless steel, easy to clean. Meanwhile, tapes are covered inside the burning box body,easy to clean, easy to maintain

2 A visible toughened glass window is in the front of the box body

3 The upper part of the box is equipped with an exhaust flue which can be externally connected with an exhaust tube. The heat generated in the test process is quickly exhausted out of the box

4,Remote control ignition by telecontroller

5, The bottom of the protective bin is provided with a universal castor which is convenient for carrying and positioning