Programmable Controller U - Shaped Wire Repeated Bending Tester For Mobile Cable

Programmable Controller U-shaped Wire Repeated Bending Tester for Mobile Cable

Comply with standard:

Enterprise standard--mobile cable, Article 2.3 U-shaped foldback test standard requirements;

Scope of application:

It is applicable to the mechanical life test of examining mobile wires and cables;

Basic introduction:

The test machine is to apply a certain force on the wire sample, simulate the motion with the manipulator and other mobile devices, to assess the mechanical durability of the wire life test.This test machine contains the glass observation window of safety protection switch and the cover plate of moving parts, which can effectively prevent the occurrence of safety accidents. It is also equipped with the emergency stop button, which can stop the operation of the machine in case of emergency.This machine has high automatization and efficiency, reasonable structure, beautiful appearance and so on, it is the ideal test equipment for producing this kind of wire factory and quality control organization.

Main parameters:

1. Control system: Taiwan veron 7-inch color touch screen, programmable controller.

2. Driving mode: panasonic ac servo motor, original Japanese gear belt;

3. Test travel: 0-10 meters, that is, the moving distance of the test piece is 0-5 meters, and the maximum moving distance of the slide table is 5  meters;

4. Cable clamp bending radius: cable drag chain bending radius: 25mm, 50mm, 75mm, 100mm arbitrary adjustment;(different sizes of drag chains are required)

5. Test speed: 0-8m/S (fastest linear speed) 0-100 times/min (the fastest speed can reach 100 times/min for small trips)

6. Test acceleration: 0-40m/S

7. Test station: 2 stations, each station shall be placed within the range of W250mm (the length of each station shall be the width of the chain clip       × the number of stations shall be less than 250mm), and the total mass shall be no more than 10kg;

8. General counter: 1~999999999 set at will, and stop when the count reaches the set value;

9. Sub-counter: each station counts independently from 1 to 999999999 continuously;

10. Alarm detection: detection of line core breakage, with sound and light alarm warning sound;

11. Internal resistance testing: it can switch internal resistance testing without stopping the machine (equipped with 10 test interfaces and  optional  internal resistance tester)

12. Working power supply;Three phases AC380V±10%, 50HZ, 15A;

13. External dimensions: about W6000mm×D750mm×H1500mm

14. Weight : about 350kg