Plastic Pipe Drop Hammer Impact Test Equipment Testing Equipment Drop Test Machine

Plastic Pipe Drop Hammer Impact Test Equipment Testing Equipment Drop Test Machine 

Introduction:

Falling weight impact test machine is suitable for the determination of the external impact resistance of various pipes (supply pipes, sewage pipes, low-pressure water pipes, low-pressure water pipes, core foam pipes, double-wall corrugated pipes, etc.).

ZL-3008E Pipe Falling Weight Impact Test Machine.p...

Meeting Standards:

JB／T9389,GB／T14152,GB／T14153,GB／T6112,GB／T5836,GB／T10002.1,GB／T10002.3,GB／T13664,GB/T16800,GB／T1847

Feature:

1. The digital display shows the impact height, with automatic suction hammer, automatic zero, automatic lifting, automatic prevention of secondary impact and other functions.

2. The two test speeds are used for the pre-height and zero points. When the long-distance rises or the low-low speed runs at high speed, the test time is saved. When the hammer is close to the pre-height, the motor automatically switches to low speed to avoid motor inertia. High positioning deviation.

3. This machine is for the chain drive to rise and fall, and the chain, sprocket and motor cooperate to avoid the entanglement caused by the wire rope drive.

4, double-tube structure, safer and more reliable when operating.

Technical parameters:

1. Maximum impact energy: 300J

2. Hammer mass: 0.25kg-15.000kg,0.125kg / increment

3. The radius of curvature of the hammer head: d25, d90 or R5mm, R10mm, R30mm, R50mm

4. Impact height: 50mm-2000mm

5. impact height error: ± 2mm

6. Sample specifications: Φ16mm-Φ400mm (can increase the test pipe diameter according to demand)

7. Power: 220V, 50Hz

8. Size: 800 × 800 × 3370mm

9. The whole machine weight: 330kg

Configuration list: