Shovel Loader Weighing Scales with Weighing Controller And Position Sensor

Shovel Loader Weighing Scales with Weighing Controller And Position Sensor

Operating Principle

1. Shovel Loader Weighing Controller is a dynamic weighing and auto-totalizing equipment installed on Shovel loader.
2. When the lift-arm of Shovel loader lifted to a certain height, the position sensor will trigger the weighing process, and the weighing indicator will collect the oil pressure signal from lower and upper oil chambers of arm-lifting oil cylinder. After signal processing and compensating, Single-bucket-loading -weight will be got and totalized to Totalized Loading Weight automatically. The operator can judge if the present Single-bucket-loading-weight is valid according to the alarm messages, and confirm the last bucket’s loading weight according to the negative deviation value.

Pictures:

Keypad Operation

Package:

Technical Specifications:

Configuration For 1 Set

1. 1 Weighing indicator with Built-in thermal printer.
2. 1 Position sensor.
3. 2 Oil pressure sensors.
4. 2 Plate type three-way joints.
5. 1 Mounting fitting.

Application Pictures:

Mode Of Delivery:

FAQ:

1. What detailed information do I need to provide if I want to place an order?

We need to know the following information: the model number of the loader you want to install, the shape and size of cylinder joint of your loader, the weight of single bucket, accuracy etc.

2. Do you have any discount?

Yes, if you buy large QTY, please send us a email, we will give you a big discount.

3. What terms of payment are available?

We accept T/T, L/C, Trade assurance, Secure payment, Western Union,etc.

4.When will you arrange the production?

We will arrange the production immediately after receiving your payment.

5. How do you ensure good product quality?

We have a complete quality control system, all of our products are fully checked by IQC, OQC departments before shipping to our clients.

6. How long is the warranty period?

The warranty period for our products is 12 (twelve) months. 

If the products from SUPMETER are proved to be unable to work normally due to unartificial reasons, and the problems can't be solved by customers under the technical support from SUPMETER, then customers can send the problematic items back to SUPMETER. SUPMETER is RESPONSIBLE to MEND (or REPLACE when necessary) them FREE OF CHARGE.

(Note: if after checking, the returned goods are proved to be in good condition, the trouble is resulted to be caused by improper operation by customers, SUPMETER is IRRESPONSIBLE to bear the shipping & other charges related to the returning.)

7. How can you help us in installation?

We have installation vedio. And we have been working on this more than 5 years. We will help you solve the problem in installation with our expirience.