High Accuracy Grade Ao 4-20mA Electronic Weighing Indicator High Sampling Frequency

High  Protecting Level Measuring Controller Electronic Weighing Indicator For 1-3 Channels Force Measuring Systm

Calibration notic

Note:

• Total Capacity of Loadcells = Loadcell Capacity × Quantity.
• Voltage Ratio = Excitation Voltage on the terminal of controller / Excitation Voltage on the terminal of loadcells.
• The rated excitation voltage for loadcells is DC9V. It’s best to measure the actual voltage value.
• 4-wire connection: The voltage attenuation is big, the voltage on both sides should be measured.
• 6-wire connection: The voltage attenuation is small, Voltage Ratio can be set to 1.0000.

 Technical Specifications
 Power Supply: DC24V±20%, Max. 5W.
 Loadcell Excitation Voltage/Current: DC5V/120mA.
 8 Loadcells[350Ω] connectable.
 Transmitter Excitation Voltage/Current: DC12V/100mA.
 Optional weighing input signal mV, V and mA.
 【mV】Signal Input Range: 0~19.5mV.
 【V】Signal Input Range: 0~2.5V, 0~5V, 0~10V.
 【mA】Signal Input Range: 0~20mA.
 2 Normally open/closed Relays [DO]: AC250V/DC24V, 1A.
 1 Analog Signal Output [AO]: 0~20mA, 0.05%FS.
 COM1: RS232.
 COM2: RS485.
 Connect Host IPC[Modbus] & Remote Display.
 Outline Size [W×H×D]: 107 × 60 × 100 mm.
 Panel Cut-out Size [W×H]: 94 × 47 mm.
 Operating Temperature: -25℃～+45℃.
 Protection Level of Front Panel: IP65.
 Accuracy Grade: III.
 Verification Accuracy: 0.03%.
 Static Weighing / Force Measuring Accuracy: 0.2%~0.5%.

     Pictures

       Main Menu

  State Indication

            Installation