Digital Weighing Controller Accuracy Grade III And Verification Accuracy 0.03%

    Weighing indicator can connect  Host IPC [Modbus]&Remote Display

Special anti-vibration digital filtering algorithm for ensuring the weighing stability and accuracy
when there is strong vibration on the load receptor, and the rapid response capability when the
weight signal changes.
 Optional weighing input signal mV, V and mA for connecting ‘【mV】Output Type Loadcell’,
‘【V】Voltage Output Type Weighing Transmitter’ and ‘【mA】Current Output Type Weighing
Transmitter’.
 Zero Upon Power Up, Zero Auto-tracking, Manual/Auto Zero and Zero Calibration available.
 Load Calibration, Data Calibration, Segmenting Span Correction and Segmenting Weight
Calculation available.
 Auto-locking, Key-locking, Key-unlocking, Digital Setting&Calibration and I/O Testing
functions available.
 1 Normally open switch input [DI] and 2 Relay switch outputs with normally open and normally
closed contacts [DO].
 1 Definable analog signal output [AO: 4~20mA / 0~20mA / 0~5V / 0~10V / …].
 RS232 and RS485 communication ports for connecting Host IPC/PLC and LED Remote

Main Application:

Weight/Force Display

Peak Value Detection/Display Holding

Setpoint DO Output

Weight/Force Signal AO/Digit Transmission

Weight/Force Increament/Decrement DO Output Mode

Weight/Force Section DO Output Mode.

Technical Specifiction:

Mini Weighing Force Measuring controller with force display and Force DO output mode

Model Panel-mounting Operation Interface