Mini Weighing Force Measuring Controller Digital Weight Indicator With Weight/Force Display

     Main Features:

• Applications: Weight/Force Display, Peak Value Detection&Display Holding, Setpoint DO Output and AO/Digit Transmission.
• 4 Optional Setpoint DO Output Modes: Weight Limit DO Alarm Mode, Weight Increment DO Output Mode, Weight Decrement DO Output Mode and Weight Section DO Output Mode.
• EMC design with high anti-jamming capability, suitable for industrial environment.
• 32-bit ARM CPU with 48MHz clock & higher arithmetic speed.
• 5 Red LED digital tubes for English character and digit display.
• Menu&Shortcut mode operation.
• 24-bit High-precision and high-speed ∑-△A/D conversion module with 1/1,000,000 internal resolution and sampling frequency 1280Hz.
• Special anti-vibration digital filtering algorithm for ensuring the weighing stability and accuracy when there is strong vibration on the load receptor, and the rapid response capability when the weight signal changes.
• Optional weighing input signal mV, V and mA for connecting ‘【mV】Output Type Loadcell’, ‘【V】Voltage Output Type Weighing Transmitter’ and ‘【mA】Current Output Type Weighing Transmitter’.
• Auto Zero Initial Calibration after Power-on, Auto Zero Tracking, Zero Fine Adjustment, Zero Calibration and Load Calibration functions available.
• Optional Data Calibration, Segmenting Span Correction and Segmenting Weight Calculation functions.
• Auto-locking, Key-locking, Key-unlocking, Digital Setting&Calibration and I/O Testing functions available.
• 2 Relay switches with normally open and normally closed contacts for outputting upper limit and lower limit alarm signals.
• 1 Optional and definable analog signal output [AO: 0~20mA].
• Optional RS232 and RS485 communication ports for connecting Host IPC/PLC and LED Remote Display.
• With the multitasking mode, the processes of weighing, alarm output and signal transmission will not be interrupted by parameter setting and the other operations.

      Technical Specification

• Executing Standard

• CMC GB/T 7724-2008PRC National Standard.
• OMIL R76: 2006International Recommendation.
• Accuracy Grade: III.
• Verification Accuracy: 0.03%.
• Static Weighing Accuracy: 0.2%~0.5%.

• Display

• 5 Red LED digital tubes for English character and digit display.
• Weight Display Range: -9,999~+99,999.
• Scale Capacity: Setting Range 1~99,999.
• Scale Division: Optional 1, 2, 5, 10, 20, 50, 100, 200, 500.
• Display Resolution: 1/50,000.
• Decimal Point: Optional 0, 0.0, 0.00, 0.000, 0.0000.
• Display Refreshing Time: Setting Range 0.01~1.00s.

• Kaypad

• 4-key keypad for Menu&Shortcut mode operation.

• Weighing Signal Interface

• Excitation Voltage / Max. Current 1: DC5V/120mA for 8-350Ω loadcells.
• Excitation Voltage / Max. Current 2: DC12V/100mA for weighing transmitter.
• Optional weighing input signal mV, V and mA for connecting ‘【mV】Output Type Loadcell’, ‘【V】Voltage Output Type Weighing Transmitter’ and ‘【mA】 Current Output Type Weighing Transmitter’.
• 【mV】Signal Input Range: 0~19.5mV [Output Sensitivity of Loadcell: 1.0~3.5mV/V].
• 【V】Signal Input Range: 0~2.5V, 0~5V, 0~10V.
• 【mA】Signal Input Range: 0~20mA.
• 24-bit ∑-△ADC with internal resolution 1/1,000,000.
• Sampling Frequency: 1280Hz.
• Special anti-vibration digital filtering algorithm.
• Zero Drift: ±0.1μV/℃ RTI (Relative to Input).
• Gain Drift: ±5ppm/℃.
• Non-linearity: 0.005%FS.

• Switch&Analog Signal Interface

• 2 Relay switches with normally open and normally closed contacts for outputting upper limit and lower limit alarm signals.
• Contact Capacity of Relay Switch: AC250V/DC24V, 1A.
• 1 Optional&Definable Analog Signal Output [AO]: 0~20mA, Non-linearity: 0.05%FS.

• 
  Digital Communication Interface

• COM1: Optional RS232.
• COM2: Optional RS485.
• Connectable: Host IPC/PLC and LED Remote Display.

• Operating Specification

• Operating Voltage: DC24V±20%.
• Max. Power Consumption: 5W.
• Outline Size: 107×60×100mm [W×H×D].
• Panel Cut-out Size: 94×47mm [W×H].
• Operating Temperature: -25℃ to +45℃.
• Storage Temperature: -30℃ to +60℃.
• Relative Humidity: Max. 85%RH.
• Protection Level of Front Panel: IP65.
• Weight: Approx. 0.3kg.

     Keypad Operation

If there is not any keypad operation in one minute and it’s not in the processes of ‘F2 System Calibration’ & ‘F6 Factory Adjustment’, the controller will return to ‘Main Display Interface’ automatically.