Display Weighing Measuring Controller For Force with LED Display
And Setpoints And AO[4-20]mA Main Applications - Weight/Force Display.
- Peak Value Detection / Display Holding.
- Weight/Force Signal AO/Digit Transmission.
- Setpoint DO Output.
- Weight/Force Limit DO Alarm Mode.
- Weight/Force Increment DO Output Mode.
- Weight/Force Decrement DO Output Mode.
- Weight/Force Section DO Output Mode.
Main Features: | 1 | EMC design with high anti-jam for industrial environment. | | 2 | DC24V power input with reverse polarity protection. | | 3 | 32-bit ARM CPU with 48MHz clock & high arithmetic speed | | 4 | 5 Red LED digital tubes for English&digit display. | | 5 | 24-bit ∑-△ADC with internal resolution 1/1,000,000. | | 6 | High sampling frequency 1280Hz. | | 7 | Optional Special Anti-vibration Digital Filtering Algorithm for
precise weighing, stable display and rapid response. | | 8 | Auto Zero Tracking. | | 9 | Load Calibration, Data Calibration & Segmenting
Correction.Definable AO/COM[Communication Port]. |
Technical Specifications - Power Supply: DC24V±20%, Max. 5W.
- Loadcell Excitation Voltage/Current: DC5V/120mA.
- 8 Loadcells[350Ω] connectable.
- Transmitter Excitation Voltage/Current: DC12V/100mA.
- Optional weighing/force input signal mV, V and mA.
- 【mV】Signal Input Range: 0~19.5mV.
- 【V】Signal Input Range: 0~2.5V, 0~5V, 0~10V.
- 【mA】Signal Input Range: 0~20mA.
- 2 Normally open/closed Relays [DO]: AC250V/DC24V, 1A.
- 1 Analog Signal Output [AO]: 0~20mA, 0.05%FS.
- COM1: RS232.
- COM2: RS485.
- Connect Host IPC[Modbus] & Remote Display.
- Outline Size [W×H×D]: 107 × 60 × 100 mm.
- Panel Cut-out Size [W×H]: 94 × 47 mm.
- Operating Temperature: -25℃～+45℃.
- Protection Level of Front Panel: IP65.
- Accuracy Grade: III.
- Verification Accuracy: 0.03%.
- Static Weighing / Force Measuring Accuracy: 0.2%~0.5%.
|
