KGD - MQ - 529 Biogas Analysis System Product Introduction The KGD - MQ - 529 Biogas Analysis System innovatively adopts the
patented technology of biogas component measurement by dilution
method. It dilutes biogas with high humidity and high H2S content,
effectively avoiding the influence of water condensation on
pipelines and sensors. At the same time, it reduces the
concentration of H2S gas, prolongs the service life of the H2S
sensor, and does not require a complex and expensive pretreatment
unit. Product Features - Reduces the water content of the sample gas after dilution,
avoiding water condensation, and eliminating the need for a complex
pretreatment unit.
- Lowers the concentration of H2S gas after dilution, greatly
extending the service life of the H2S sensor.
- Equipped with an ultrasonic flow detection unit to simultaneously
monitor the flow rates of the sample gas and dilution gas as well
as the dilution ratio.
- The NDIR and ECD sensors adopt a modular design, facilitating
maintenance and replacement.
- The cabinet and components are subject to anti - corrosion
treatment, making it suitable for biogas measurement environments
with high humidity and high H2S content.
- Patented technology of biogas component measurement by dilution
method.
- The biogas analyzer has won the title of "National Key New
Product".
Technical Parameters | Parameter | Details | | Measured Components | CH4/CO2/H2S/O2 | | Measurement Range | CH4: (0 - 100)%; CO2: (0 - 50)%; H2S: (0 - 9999) ppm; O2: (0 - 25%)
(All ranges are optional) | | Response Time | T90≤60s (NDIR) | | Optimal Flow Rate | (0.7 - 1.2) L/min | | Inlet Gas Pressure | (2 - 50) kPa | | Gas Requirements | Dust - free, water - free, oil - free | | Electrical Parameters | Electrical parameters | | Communication | RS - 485/RS - 232, (4 - 20) mA | | Power Supply | AC220V, 50HZ |
|
