Handheld Electrolyte Leak Detector KGD-AM-208 Product Introduction The Handheld Electrolyte Leak Detector KGD-AM-208 is equipped with
a built-in TFT liquid crystal display screen. It can not only
detect the leakage points but also conduct a quantitative analysis
of the electrolyte leakage concentration in the current environment
and display the current concentration data. The functions such as
power on/off, start/stop of detection, setting of detection
sensitivity, and switching between automatic/manual zero adjustment
can be realized through the buttons. When electrolyte leakage is
detected in the measured environment, the display screen will show
the leakage level according to different concentrations, and the
buzzer will sound as a reminder. The red LED at the front end of
the gooseneck probe will indicate the position of the alarm point.
The detector is powered by a large-capacity lithium battery, which
allows for a long continuous working time. It can be recharged
repeatedly and is equipped with a standard Type-C charging
interface, enabling charging anytime and anywhere. Product Features - Infrared sensor with independent intellectual property rights
- High selectivity and good repeatability for electrolyte leakage
- Can ensure high detection accuracy within the full temperature and
full measurement range
- Fast response time
- Powered by a lithium battery and rechargeable
- Fault self-checking function
- High reliability and long service life (more than 10 years)
- Data visualization
- Small in size and suitable for portable detection
Technical Parameters | Detection Gas Type | Electrolyte vapors such as DMC, EMC, EC, etc. | | Sensitivity Level | High, Medium, Low | | Maximum Sensitivity | 0.03 ounces per year (1g/a) when stationary; 0.1 ounces per year
(3g/a) when in motion | | Detection Feedback | Red emitting LED, LCD bar chart, LCD digital display, buzzer | | Response Time (T90) | < 30 seconds (typical value) | | Recovery Time | < 10 seconds (typical value) | | Preheating Time | < 12s | | Display Resolution | 1ppm | | Accuracy | ±(5ppm + 10% of the reading) | | Display Range | 0-9999ppm | | Charging and Standby Time | Charging time: 3.5H; Working time: 8H | | Net Weight of the Bare Machine | 360g ± 20g | | Design Service Life | 10 years | | IP Protection Grade | IP54 | | Product Standard | EN14624 | | Working Conditions | 0°C to 40°C (32°F to 104°F); < 75%RH (non-condensing) | | Storage Conditions | -20°C to 60°C (-4°F to 140°F); < 80%RH | | Applicable Places | Daily inspection for leakage of DMC, EMC, EC, etc. | | Input Voltage | 5V ± 5% | | Input Current | 1A ± 5% |
|
