China Fluid Level Meter manufacturer
Xi'an Kacise Optronics Co.,Ltd.
Kacise, understanding your automation needs.
7
Home > Products > Ultrasonic Transducer Sensor >

Oem Ultrasonic Proximity Distance Meter Sensor KUS3000 Series with protection class IP66

Oem Ultrasonic Proximity Distance Meter Sensor KUS3000 Series with protection class IP66

Brand Name Kacise
Model Number KUS3000
Place of Origin China
Minimum Order Quantity 1
Price Negotiable
Payment Terms L/C, D/A, D/P, T/T, Western Union, MoneyGram
Supply Ability 100+
Delivery Time 5-8 work days
Packaging Details 15*20*15cm,0.3kg
Certification CE
Range 1m~12m
Output 4~20mA/NPN/PNP/RS485
Protection class IP66
Power supply 13-30V
Material Nickel plated copper
Temperature -25~70℃
Accuracy ≤1 %
Detailed Product Description

KUS3000 M30-Type3​ Ultrasonic Level Meter

  • Compact and durable
  • IoT-specific models
  • High resolution and small dead zone

 

1. Dimensional structure


The unit is mm.

                                                                                                                    

2. Electrical interface

 

Note: This product has two cable specifications, and the cable wiring instructions of the two specifications are as follows:

Type A cableType B cable
Pin1BrownPin1Yellow
Pin2WhitePin2Black
Pin3BluePin3Red
Pin4BlackPin4Green

The default cable mix is based on the specifications received by the customer

 

3. Technical parameter

 

ModelKUS3000 M18 KUS3000 M30-Type1, M30-Type2, M30-Type3
Measuring range0.15~1m/0.2~2m/0.3~4m/0.4~6m/0.6~12m
Supply voltage13 ... 30 VDC, special wide voltage requirements can be customized
Output signal1.4-20mA/NPN/PNP/TTL;    2. RS485 Modbus.
No-load current I0≤ 45 mA
Overload current Ie200 mA , reverse polarity protection, short circuit protection
Power consumption I0≤ 15 mA, sleep state ≤ 1mA, serial port wake-up
Repeatability≤1%
Temperature compensation range-40…85°C
Working environment temperature-25...70℃ (248...343K)
Storage temperature-40...85°C (233...358K)
Switching frequency f≤ 13 Hz high frequency can be customized
Protection levelIP66, others can be customized
Shell materialnickel-plated copper, others can be customized
ConnectorV1 connector (M12×1), 4-Pin
Supply voltage3.3-12 DC, ripple 10%SS

Indicator light

Blue led lightThe blue light flashes to indicate that calibration can be performed. Blue and other constants indicate that the power supply of the sensor is normal. The blue light will flash within 5 minutes after the power is turned on, indicating that the user can perform output adjustment and calibration. After 5 minutes, the blue light is always on to indicate that the sensor cannot be receiving Calibration command. .
Tellow led lightIt is used to indicate whether the measured object is detected. During the calibration stage, the yellow light flashes to indicate that the current calibration state is locked, and it can be switched to the next calibration state.
Red LED light

In normal working state, the red light is not on, and the red light is on to indicate that there is a fault.

During the calibration process, the flashing red light indicates that the sensor locks the current echo loss or infinity state, and the user can switch to the next calibration state.

 

Note: When the M18 product and M30 product have 4-20mA analog output, the meter connection method is different from that of the 550,600 product. Since the output terminal of the M18 and M30 products is powered by VDD, as shown in Figure 1, the meter should be connected to the power supply port. Between the output terminal and the output terminal, the connection instruction diagram is shown in Figure 2:

Figure 1 Output power supply circuit diagram

Figure 2 Schematic diagram of connection method

 

4. Order information

 

KUSTypes ofoutputrangedescribe
 M18M18 housing, maximum measuring range is 1 meter
M30-Type1M30 maximum measuring range is 2 meter
M30-Type2M30 maximum measuring range is 3 meter
M30-Type3M30 maximum measuring range is 6 meter, 8 meters can be customized
CustomizedShell supports user customization
 NPNoutput as NPN
PNPoutput as PNP
10VoutThe output is analog 0-10V, the power supply requirement is greater than 11V
5VoutThe output is analog 0-5V, the power supply requirement is greater than 6V
mAoutThe output is analog 4-20mA
RS485The output is RS485 Modbus protocol, please refer to the software interface manual for specific description.
  XXX mmThe customer specifies the linear interval or switch interval, which can be set at the factory
KUSM30RS4856000mm 

 

 

5.Application

 

Product Tags: Ultrasonic Proximity Distance Meter Sensor   KUS3000 Series Ultrasonic Transducer Sensor   Ultrasonic Distance Meter Sensor  
Related Products
Email to this supplier
 
From:
Enter your Email please.
To: Xi'an Kacise Optronics Co.,Ltd.
Subject:
Message:
Characters Remaining: (80/3000)