Waterproof IP68 Protection Ultrasonic Transducer Sensor PTFE Shell

KUS630 Series Ultrasonic Transducer Sensor 24 VDC IP68 Protection

1.Features

1.High sensitivity

2.Fully sealed

3.IP68 protection class

4.Corrosion-resistant housing, suitable for corrosive media and applications

2. Dimensions

Unit in the diagram is mm

3. Electrical connections and signal definitions

4.Parameter description

5. Sensor function analog

The analog output can be set through RS485, and the sensor can work in 8 modes. The specific reference is as follows:

Step 1: Connect to the host computer through serial port debugging assistant or modus debugging assistant.

Step 2, set a near point reference distance point.

Step 3, Set a far point reference point

Step 4, set the output voltage or current of the near-point reference point.

Step 5, set the output voltage or current of the far point reference point.

Step 6, set the analog output to switch characteristic selection.

Step 7, set the analog output as linear output or switch output option.

Step 8, reset the sensor to make the new parameters take effect.

8 working modes of the sensor.

1: Open window mode by default

2: Windowed mode is turned off by default

3: Single-point mode is turned on by default

4: Single-point mode is turned off by default

5: Single-point hysteresis mode is turned on by default

6: The single-point hysteresis mode is turned off by default

7: The presence or absence of detection mode is turned on by default

8: The presence or absence of detection mode is turned off by default

485 output data

485 output data is in MODBUS-RTU format. Refer to the software instruction manual for details.

Little knowledge of liquid level gauge
Ultrasonic level gauge is a digital level instrument. The distance between the sensor and the surface of the liquid being measured is calculated from the time between the emission and reception of the sound waves. Using non-contact measurement, it can be widely used to measure the height of liquid and solid materials.

Precautions:Selection reminder: For special requirements, please contact our company and indicate in the order.

1. If you need to calibrate the meter, please contact our company. Non-professionals are not allowed to calibrate the meter.

2. When calibrating the meter, please turn on the meter first, and calibrate it after 1 hour of constant temperature.

Company information

Xi'an Kacise Optronics Co., Ltd. was founded in 2000, is located in Xi'an, Shaanxi Province, China, is a professional engaged in instrumentation and sensors, R & D, production, sales as one of professional high-tech enterprises, we have our own production workshop and central laboratory. Factory building area is about 3000 square meters, with production of more than 30 employees, 8 engineer, 6 inspectors, 10 saleman, 5 for customer service, is this industry, we are one of the strong technology manufacturers with varieties specification.

When the company set up, we began to focus on the coordination of military supplies production, achieved GB/T19001-2008/ISQ9001:2008, GJB 9001B-2009 certification. When our company is running mature and stable, in 2008, we began to develop our business. Based on the production of military products quality control, we developed a lot of sensor products, such as a pressure sensor / transducer / sensor, level transmitter / ultrasonic level meter / ultrasonic flow meter, inertial navigation products, IMU, gyroscope, accelerometer etc.