KEC601 Small Outline Online Water Quality Monitor Conductivity Sensor For Drinking Water Surface Water Various Water

1.Application Environment

• Drinking water / surface water / various water supply / industrial water treatment.
• Signal output: RS-485 (Modbus/RTU protocol).
• Convenient connection to third-party equipment such as PLC, DCS, industrial control computer, general controller, paperless recording instrument or touch screen.
• Immersion installation with 3/4 NPT pipe thread for easy submersible installation or installation in pipes and tanks.
• IP68 protection grade.

2.Technical Specifications

3.Dimensional Drawing

4.Installation and Electrical Connection

4.1 Installation

Note: At least 2 cm from the bottom and side walls of the container during installing and testing.

4.2 Electrical Connection

a) Red line - power cord (12 ~ 24V)

b) Black line - ground (GND)

c) Blue line - 485A

d) white line - 485B

e) bare wire - shielded wire

After wiring is completed, it should be carefully checked to avoid incorrect connections before powering up.

Cable specification: Considering that the cable is immersed in water (including sea water) for a long time or exposed to the air, the cable has certain corrosion resistance. The outer diameter of the cable is Φ6 mm and all interfaces are waterproof.