Explosion Proof Insertion Fluid Level Meter Ultrasonic Flow Meter IP65 Protection

Explosion Proof Insertion Fluid Level Meter Ultrasonic Flow Meter IP65 Protection

 Introduction

KUFS2000C insertion type ultrasonic flow meter consists of the meter and insertion transducer.

Install the transducer by opening two holes on the pipeline.

No need to cutoff water by using the specialized tool.

Transducers are in direct contact with fluid, which make the measurement more steady and reliable.

If connecting Pt100 temperature transducer, it can realize the heat/energy measurement.

Working Condition

Basic Parameters

Optional Insertion Sensors

Standard Insertion Sensor                                                                        

· Suitable for the pipeline can be directly welded, like carbon steel and stainless.

· Pipeline thickness ≤ 2 0

· Measuring range: DN50~DN6000

· Temperature range:-30~+160℃

Extended Insertion Sensor

  ·Suitable for the pipeline cannot be directly welded, like cement pipe, cast iron, PVC, steel or composite material.

·Pipeline thickness ≤ 7 0

·Measuring range: DN50~DN6000

·Temperature range:-30~+160℃

Parallel Insertion Sensor

·Suitable for installation of insufficient space.

·Suitable for either weldable or non-weldable pipeline.

·Unlimited pipeline thickness, insertion depth=1/3 inner diameter.

·Measuring range: DN80~DN6000

·Temperature range: -30~+160℃

Optional Fittings

Pipe Clamp

 By using pipe clamp, the insertion sensor can be installed without welding. There is no need to cut off water during installation. Especially   suitable for cement pipe, cast iron pipe, PVC, copper pipe or composite material.