Mobile Control GPRS Wireless Level Sensor , Wireless Level Transmitter IP65 Defend Grade
|
OEM Mobile Control GPRS Wireless Irrigate Distance Water Fuel Level Sensor ROLA
1.description
A level sensor (hydrostatic level gauge/level transmitter/level sensor/water level sensor) is a pressure sensor for measuring liquid levels. The static pressure input liquid level transmitter (liquid level meter) is based on the principle that the measured hydrostatic pressure is proportional to the height of the liquid. It uses isolated diffused silicon sensitive element or ceramic capacitive pressure sensitive sensor to convert the static pressure into electrical signal, and then converts it into standard electrical signal (generally 4 ~ 20mA/1 ~ 5VDC) after temperature compensation and linear correction. It is suitable for liquid level measurement of various media in petrochemical, metallurgy, electric power, pharmaceutical, water supply and drainage, environmental protection and other systems and industries.
2. System Summarize
The “Liquid height measuring system in GPRS communicate mode” include “Liquid height measuring terminal equipment in GPRS communicate mode”, “Server Management Software” and “Configuration Line”. It is used for timing measure liquid height value, temperature value, longitude and latitude data, date and time information and show these value in the “Server Management Software”. Notice 1: The “Liquid height measuring system in GPRS communicate mode” for short “System” as following description. Notice 2: The “Liquid height measuring terminal equipment in GPRS communicate mode” for short “Terminal” as following description. Notice 3: The “Server Management Software” for short “Software” as following description. Notice 4: The “Configuration Line” for short “Line” as following description. The “Terminal” is used for timing measure liquid height value and temperature value, and transmit these measuring value to the “Software” in GPRS communicate mode, the user can use “Software” to see the liquid height value and manage these “Terminal”. The “Software” is only a demo software to offer the user, its function is very simple, and it is not have a powerful function to take many “Terminal” running at the same time. If user need a large system “Software” with powerful function, please contact Xi’an Kacise Optronics Tech Co., Ltd. The “Line” is only used for configure “Terminal” by user, it is connect between the “Terminal” and the RS232 serial port of computer.
3. “Terminal” Structure Drawing
GXPS609(GPRS) terminal structure drawing: as picture one
The back of GXPS609(GPRS) terminal: as picture two
4. Technology Standard and Power Supply Use
|
||||||||||||||||||||||||||
Product Tags: ultrasonic fluid level sensor ultrasonic liquid level sensor |
![]() |
KLD801 Radar Level Gauge For Non-corrosive Liquids Is Used For Level Monitoring Of Non-corrosive Liquids |
![]() |
KLD802 Radar Level Gauge For Slightly Corrosive Liquids For Slightly Corrosive Liquids Monitoring |
![]() |
High Temperature And High Pressure Corrosion Resistant Capacitive Level Sensor For Boiler Level Monitoring |
![]() |
IP67 Fluid Level Meter Diesel Level Transmitter With GPS Tracker For Fleet Management |
![]() |
Corrosion Resistant Capacitive Level Transmitter With NPN/PNP Output Is Used For Level Monitoring In Laboratory Reactors |
![]() |
Small Capacitance Level Transmitter With RS485/4-20mA Output For Level Monitoring Of Reactor |