Cisco Copper RJ45 Sfp Port Connector Compact Assembly Low Power Dissipation

Copper SFP 10/100/1000Base Copper-T SFP 100M GLC-T Compatible with Cisco

Features

Ø Up to 1.25Gb/s bi-directional data links

Ø Hot-pluggable SFP footprint

Ø Fully metallic enclosure for low EMI

Ø TX Disable and RX Los/without Los function

Ø Compact RJ-45 connector assembly

Ø Low power dissipation (1.05 W typical)

Ø Access to physical layer IC via 2-wire serial bus

Ø10/100/1000Mbps compliant in host systems with SGMII interface

Ø Operating case temperature range of

           0°C to +70°C (Commercial)

           -20°C to +85°C (Extend)

Applications

Ø Gigabit Ethernet

Ø Fiber Channel

Ø Switch to Switch interface

Ø Switched backplane applications

Ø Router/Server interface

Ø Other optical transmission systems

Description

linkopto S-T2-RJ45 Copper Small Form Pluggable (SFP)transceivers is high performance, cost effective module compliant with the Gigabit Ethernet and 10/100/1000BASE-T standards as specified in IEEE 802. 3-2002 and IEEE 802.3ab, which supp- orting 1000Mbps data- rate up to 100 meters reach over unshielded twisted-pair category 5 cable.

The module supports1000 Mbps full duplex data-links with 5-level Pulse Amplitude Modulation (PAM) signals. All four pairs in the cable are used with symbol rate at 250Mbps on each pair.

The module provides standard serial ID information compliant with SFP MSA, which can be accessed with address of A0h via the 2wire serial CMOS EEPROM protocol. The physical IC can also be accessed via 2wire serial bus at address ACh.

Quality Control

linkopto Package

C

Related Prodcuts